lkml.org 
[lkml]   [2018]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] ARM64: dts: meson-gxbb-wetek: add ttyAML1 uart for Bluetooth
Date
This change adds the uart_A used by the brmcfmac sdio module in the
WeTek Hub and WeTek Play 2 devices. meson_uart_probe seems to mandate
an alias (without it, BT is not working) so this is also included.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index 70325b2..e75ace7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -10,6 +10,7 @@
/ {
aliases {
serial0 = &uart_AO;
+ serial1 = &uart_A;
ethernet0 = &ethmac;
};

@@ -239,6 +240,18 @@
vqmmc-supply = <&vddio_boot>;
};

+/* This is connected to the Bluetooth module: */
+&uart_A {
+ status = "okay";
+ pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+ pinctrl-names = "default";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
+ };
+};
+
/* This UART is brought out to the DB9 connector */
&uart_AO {
status = "okay";
--
2.7.4
\
 
 \ /
  Last update: 2018-09-07 14:17    [W:0.094 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site