lkml.org 
[lkml]   [2018]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: dts: at91: sama5d2_ptc_ek: fix nand pinctrl
Date
The drive strength has to be set to medium otherwise some data
corruption may happen.

Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
---

Hi,

This fix depends on the support of the drive-strength for the atmel pio4
pinctroller. It has been added in v4.19 but I omitted to send it at the
same time.

Ludovic

arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 2 ++
1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
index b10dccd0958f..3b1baa8605a7 100644
--- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -11,6 +11,7 @@
#include "sama5d2-pinfunc.h"
#include <dt-bindings/mfd/atmel-flexcom.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/at91.h>

/ {
model = "Atmel SAMA5D2 PTC EK";
@@ -299,6 +300,7 @@
<PIN_PA30__NWE_NANDWE>,
<PIN_PB2__NRD_NANDOE>;
bias-pull-up;
+ atmel,drive-strength = <ATMEL_PIO_DRVSTR_ME>;
};

ale_cle_rdy_cs {
--
2.12.2
\
 
 \ /
  Last update: 2018-09-07 10:24    [W:0.104 / U:2.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site