lkml.org 
[lkml]   [2018]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v10 2/2] leds: sc27xx: Add pattern_set/clear interfaces for LED controller
Hi Pavel,

On 7 September 2018 at 05:16, Pavel Machek <pavel@ucw.cz> wrote:
> Hi!
>
>> diff --git a/Documentation/ABI/testing/sysfs-class-led-driver-sc27xx b/Documentation/ABI/testing/sysfs-class-led-driver-sc27xx
>> new file mode 100644
>> index 0000000..d8056d5
>> --- /dev/null
>> +++ b/Documentation/ABI/testing/sysfs-class-led-driver-sc27xx
>> @@ -0,0 +1,22 @@
>> +What: /sys/class/leds/<led>/hw_pattern
>> +Date: September 2018
>> +KernelVersion: 4.20
>> +Description:
>> + Specify a hardware pattern for the SC27XX LED. For the SC27XX
>> + LED controller, it only supports 4 stages to make a single
>> + hardware pattern, which is used to configure the rise time,
>> + high time, fall time and low time for the breathing mode.
>> +
>> + For the breathing mode, the SC27XX LED only expects one brightness
>> + for the high stage. To be compatible with the hardware pattern
>> + format, we should set brightness as 0 for rise stage, fall
>> + stage and low stage.
>> +
>> + Min stage duration: 125 ms
>> + Max stage duration: 31875 ms
>> +
>> + Since the stage duration step is 125 ms, the duration must be
>> + a multiplier of 125, like 125ms, 250ms, 375ms, 500ms ... 31875ms.
>> +
>> + Thus the format of the hardware pattern values should be:
>> + "0 rise_duration brightness high_duration 0 fall_duration 0 low_duration".
>
> If I'm not mistaken, this is:
>
> "0 rise_duration brightness high_duration brightness
> fall_duration 0 low_duration".
>
> Right?

Hmmm, for SC27XX led, there is no need to set brightness for rise and
fall stage.

>
> With that fixed:
>
> Acked-by: Pavel Machek <pavel@ucw.c>

Thanks.

--
Baolin Wang
Best Regards

\
 
 \ /
  Last update: 2018-09-07 04:51    [W:0.793 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site