lkml.org 
[lkml]   [2018]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/3] arm64: dts: qcom: pm8998: Add adc node
Hi,

On Mon, Aug 27, 2018 at 10:10 AM, Matthias Kaehlcke <mka@chromium.org> wrote:
> On Fri, Aug 10, 2018 at 05:09:17PM -0700, Doug Anderson wrote:
>> Hi,
>>
>> On Wed, Aug 8, 2018 at 12:13 PM, Matthias Kaehlcke <mka@chromium.org> wrote:
>> > This adds the adc node to pm8998 based on the examples in the
>> > bindings. It also fixes the order of the included headers.
>> >
>> > Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
>> > ---
>> > arch/arm64/boot/dts/qcom/pm8998.dtsi | 13 ++++++++++++-
>> > 1 file changed, 12 insertions(+), 1 deletion(-)
>> >
>> > diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi
>> > index 92bed1e7d4bb..f70f6101bceb 100644
>> > --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi
>> > +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi
>> > @@ -1,8 +1,9 @@
>> > // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> > /* Copyright 2018 Google LLC. */
>> >
>> > -#include <dt-bindings/spmi/spmi.h>
>> > +#include <dt-bindings/iio/qcom,spmi-vadc.h>
>> > #include <dt-bindings/interrupt-controller/irq.h>
>> > +#include <dt-bindings/spmi/spmi.h>
>> >
>> > &spmi_bus {
>> > pm8998_lsid0: pmic@0 {
>> > @@ -11,6 +12,16 @@
>> > #address-cells = <1>;
>> > #size-cells = <0>;
>> >
>> > + pm8998_adc: adc@3100 {
>> > + compatible = "qcom,spmi-adc-rev2";
>> > + reg = <0x3100>;
>> > + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
>> > + #address-cells = <1>;
>> > + #size-cells = <0>;
>> > + #io-channel-cells = <1>;
>> > + io-channel-ranges;
>> > + };
>>
>> I'm a little confused about what the "io-channel-ranges" does here.
>> The documentation isn't clear at all to me for it. If I'm reading it
>> right it's also supposed to be for iio-consumers, but you're using it
>> in a provider. I see you copied this from the example. Maybe the
>> example is wrong? ...or I'm just confused...
>
> Yes, I copied it from the example, its use here is also not clear to
> me, other ADC providers like adc@126c0000 in exynos3250.dtsi or
> adc@180a6000 in bcm-cygnus.dtsi also specify it ...
>
> Siddartha/Jonathan, could you help to clarify if "io-channel-ranges"
> should really be specified here as the DT example suggests?

Does everything work if you just remove the "io-channel-ranges"? We
could remove it and always add it back in later if someone could
explain what it's for or if we find a reason why it was needed? ...or
we have any other ideas for how to get this resolved? :(

-Doug

\
 
 \ /
  Last update: 2018-09-06 20:35    [W:0.060 / U:2.696 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site