lkml.org 
[lkml]   [2018]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 04/13] drm/mediatek: add clock factor for different IC
From
Date
Hi, Bibby:

One inline comment.

On Wed, 2018-09-05 at 16:31 +0800, Bibby Hsieh wrote:
> From: chunhui dai <chunhui.dai@mediatek.com>
>
> different IC has different clock designed in HDMI, the factor for
> calculate clock should be different. Usinng the data in of_node
> to find this factor.
>
> Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_dpi.c | 28 +++++++++++++++++++---------
> 1 file changed, 19 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index df27107b1f0b..3758cfeb586b 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -119,6 +119,7 @@ struct mtk_dpi_yc_limit {
> };
>
> struct mtk_dpi_conf {
> + unsigned int (*cal_factor)(int clock);
> const u32 reg_h_fre_con;
> bool edge_sel_en;
> };
> @@ -458,16 +459,12 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
> unsigned long pll_rate;
> unsigned int factor;
>
> + if (!dpi) {
> + dev_err(dpi->dev, "invalid argument\n");
> + return -EINVAL;
> + }

I think this should not be in this patch, move to an independent patch.

Regards,
CK

> /* let pll_rate can fix the valid range of tvdpll (1G~2GHz) */
> -
> - if (mode->clock <= 27000)
> - factor = 3 << 4;
> - else if (mode->clock <= 84000)
> - factor = 3 << 3;
> - else if (mode->clock <= 167000)
> - factor = 3 << 2;
> - else
> - factor = 3 << 1;
> + factor = dpi->conf->cal_factor(mode->clock);
> drm_display_mode_to_videomode(mode, &vm);
> pll_rate = vm.pixelclock * factor;
>
> @@ -681,7 +678,20 @@ static const struct component_ops mtk_dpi_component_ops = {
> .unbind = mtk_dpi_unbind,
> };
>
> +static unsigned int mt8173_calculate_factor(int clock)
> +{
> + if (clock <= 27000)
> + return 3 << 4;
> + else if (clock <= 84000)
> + return 3 << 3;
> + else if (clock <= 167000)
> + return 3 << 2;
> + else
> + return 3 << 1;
> +}
> +
> static const struct mtk_dpi_conf mt8173_conf = {
> + .cal_factor = mt8173_calculate_factor,
> .reg_h_fre_con = 0xe0,
> };
>


\
 
 \ /
  Last update: 2018-09-06 04:12    [W:0.546 / U:0.660 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site