lkml.org 
[lkml]   [2018]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 4/4] dt-bindings: msm: Update documentation of qcom,llcc
On 2018-09-06 06:16, Sai Prakash Ranjan wrote:
> On 9/5/2018 4:52 AM, Venkata Narendra Kumar Gutta wrote:
>> Add reg-names and interrupts for LLCC documentation and the usage
>> examples. llcc broadcast base is added in addition to llcc base,
>> which is used for llcc broadcast writes.
>>
>> Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
>> Reviewed-by: Rob Herring <robh@kernel.org>
>> ---
>> .../devicetree/bindings/arm/msm/qcom,llcc.txt | 19
>> +++++++++++++++++--
>> 1 file changed, 17 insertions(+), 2 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
>> b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
>> index 5e85749..2e007dc 100644
>> --- a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
>> +++ b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
>> @@ -16,11 +16,26 @@ Properties:
>> - reg:
>> Usage: required
>> Value Type: <prop-encoded-array>
>> - Definition: Start address and the the size of the register region.
>> + Definition: The first element specifies the llcc base start address
>> and
>> + the size of the register region. The second element specifies
>> + the llcc broadcast base address and size of the register
>> region.
>> +
>> +- reg-names:
>> + Usage: required
>> + Value Type: <stringlist>
>> + Definition: Register region names. Must be "llcc_base",
>> "llcc_bcast_base".
>> +
>> +- interrupts:
>> + Usage: required
>> + Definition: The interrupt is associated with the llcc edac device.
>> + It's used for llcc cache single and double bit error detection
>> + and reporting.
>> Example:
>> cache-controller@1100000 {
>> compatible = "qcom,sdm845-llcc";
>> - reg = <0x1100000 0x250000>;
>> + reg = <0x1100000 0x200000>, <0x1300000 0x50000> ;
>> + reg-names = "llcc_base", "llcc_bcast_base";
>> + interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
>> };
>>
>
> Also, llcc_bcast_base should be llcc_broadcast_base as given in Patch
> 1 or you can change to llcc_bcast_base in Patch 1 of series.

My bad, I'll correct that in the next series.

\
 
 \ /
  Last update: 2018-09-07 00:43    [W:0.041 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site