lkml.org 
[lkml]   [2018]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] xen-blkback: Switch to closed state after releasing the backing device
On Wed, Sep 05, 2018 at 12:36:49PM +0200, Roger Pau Monné wrote:
> On Wed, Aug 29, 2018 at 08:52:14AM +0200, Valentin Vidic wrote:
> > Switching to closed state earlier can cause the block-drbd
> > script to fail with 'Device is held open by someone':
> >
> > root: /etc/xen/scripts/block-drbd: remove XENBUS_PATH=backend/vbd/6/51712
> > kernel: [ 2222.278235] block drbd6: State change failed: Device is held open by someone
> > kernel: [ 2222.278304] block drbd6: state = { cs:Connected ro:Primary/Secondary ds:UpToDate/UpToDate r----- }
> > kernel: [ 2222.278340] block drbd6: wanted = { cs:Connected ro:Secondary/Secondary ds:UpToDate/UpToDate r----- }
> > root: /etc/xen/scripts/block-drbd: Writing backend/vbd/6/51712/hotplug-error /etc/xen/scripts/block-drbd failed; error detected. backend/vbd/6/51712/hotplug-status error to xenstore.
> > root: /etc/xen/scripts/block-drbd: /etc/xen/scripts/block-drbd failed; error detected.
> >
> > Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr>
> > Cc: stable@vger.kernel.org
> > ---
> > drivers/block/xen-blkback/xenbus.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c
> > index a4bc74e72c39..43bddc996709 100644
> > --- a/drivers/block/xen-blkback/xenbus.c
> > +++ b/drivers/block/xen-blkback/xenbus.c
> > @@ -323,6 +323,7 @@ static void xen_blkif_free(struct xen_blkif *blkif)
> > {
> > WARN_ON(xen_blkif_disconnect(blkif));
> > xen_vbd_free(&blkif->vbd);
> > + xenbus_switch_state(blkif->be->dev, XenbusStateClosed);
> > kfree(blkif->be->mode);
> > kfree(blkif->be);
> >
> > @@ -814,7 +815,6 @@ static void frontend_changed(struct xenbus_device *dev,
> >
> > case XenbusStateClosed:
> > xen_blkif_disconnect(be->blkif);
> > - xenbus_switch_state(dev, XenbusStateClosed);
> > if (xenbus_dev_is_online(dev))
> > break;
>
> AFAICT, this will cause the backend to never switch to 'Closed' state
> until the toolstack sets online to 0, which is not good IMO.
>
> If for example a frontend decides to close a device, the backend will
> stay in state 'Closing' until the toolstack actually removes the disk
> by setting online to 0.
>
> This will prevent resetting blk connections, as blkback will refuse to
> switch to state XenbusStateInitWait unless it's at XenbusStateClosed
> (see the XenbusStateInitialising case in frontend_changed), which will
> never be reached with your patch.

Ok, is it possible to test this somehow?

> Maybe the easiest solution would be to wait in the block-drbd script
> until the device is released? Maybe using fstat in a loop or one of
> the drbd tools?

That is an option, but I don't know if it is possible to check device
release like that. Including drbd-user in CC, maybe they have some
idea how to solve this.

--
Valentin

\
 
 \ /
  Last update: 2018-09-05 18:29    [W:1.450 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site