lkml.org 
[lkml]   [2018]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRe: [PATCH 09/10] phy: Add Cadence D-PHY support
    Date
    Hi Maxime,

    Thank you for the patch.

    On Wednesday, 5 September 2018 12:16:40 EEST Maxime Ripard wrote:
    > Cadence has designed a D-PHY that can be used by the, currently in tree,
    > DSI bridge (DRM), CSI Transceiver and CSI Receiver (v4l2) drivers.
    >
    > Only the DSI driver has an ad-hoc driver for that phy at the moment, while
    > the v4l2 drivers are completely missing any phy support. In order to make
    > that phy support available to all these drivers, without having to
    > duplicate that code three times, let's create a generic phy framework
    > driver.
    >
    > Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
    > ---
    > drivers/phy/Kconfig | 1 +-
    > drivers/phy/Makefile | 1 +-
    > drivers/phy/cadence/Kconfig | 13 +-
    > drivers/phy/cadence/Makefile | 1 +-
    > drivers/phy/cadence/cdns-dphy.c | 499 +++++++++++++++++++++++++++++++++-

    Should the DT bindings be split from Documentation/devicetree/bindings/
    display/bridge/cdns,dsi.txt ?

    > 5 files changed, 515 insertions(+)
    > create mode 100644 drivers/phy/cadence/Kconfig
    > create mode 100644 drivers/phy/cadence/Makefile
    > create mode 100644 drivers/phy/cadence/cdns-dphy.c

    [snip]

    --
    Regards,

    Laurent Pinchart



    \
     
     \ /
      Last update: 2018-09-05 15:49    [W:4.630 / U:0.056 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site