lkml.org 
[lkml]   [2018]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 0/6] drm/sun4i: Support color dithering for LCD panels
On Thu, Apr 19, 2018 at 3:02 PM, Chen-Yu Tsai <wens@csie.org> wrote:
> Dithering is a method of approximating a color from a mixture of other
> colors when the required color isn't available. It reduces color
> banding artifacts that can be observed when displaying gradients
> (e.g. grayscale gradients). This may occur when the image that needs
> to be displayed is 24-bit but the LCD panel is a lower bit depth and
> does not perform dithering on its own.
>
> The TCON (LCD controller) found in Allwinner SoCs has hardware support
> for dithering on channel 0, the channel used to feed LCD panels. This
> series adds support for it.
>
> Patch 1 reworks the mode set function for the CPU interface to pass
> the encoder object, so it can be passed to other helper functions.
>
> Patch 2 renames the dithering related register macros to reflect the
> fact that dithering is only supported on channel 0.
>
> Patch 3 adds support for dithering on all LCD panel output types.
>
> Patch 4 adds support for Banana Pi's 7" DPI LCD panel.
>
> Patch 5 adds a pinmux setting for RGB888 for the Allwinner A20 SoC.
> This change has been sent by others before.
>
> Patch 6 provides an example for enabling the Banana Pi 7" DPI LCD panel
> on the Banana Pi M1+. This should not be merged. I will likely rework
> this into an overlay in the future.
>
> Note that I was only able to test dithering with DPI, as I do not have
> other panel types. However the underlying concept and core code is the
> same, as are the drm objects accessed. Nevertheless I'm hoping Jonathan
> can test LVDS and Maxime can test MIPI DSI.
>
> Also it seems pwm-backlight hardware is unusable at the moment. I'm not
> sure whether the pwm-backlight or sun4i-pwm driver is to blame. I had to
> manually poke the pwm registers so the LCD backlight wouldn't be
> completely black.
>
>
> Regards
> ChenYu
>
> Chen-Yu Tsai (5):
> drm/sun4i: tcon: Pass drm_encoder * into sun4i_tcon0_mode_set_cpu
> drm/sun4i: tcon: Rename Dithering related register macros
> drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel
> ARM: dts: sun7i: add pinmux setting for RGB888 output for LCD0
> [DO NOT MERGE] ARM: dts: sun7i: bananapi-m1-plus: Enable Bananapi 7"
> 800x480 RGB LCD panel
>
> Jonathan Liu (1):
> drm/sun4i: tcon: Add dithering support for RGB565/RGB666 LCD panels

Do you have any working branch to test this, I can't see drm probing
on linux-next, I even enabled de on dts which is missing.

Jagan.

\
 
 \ /
  Last update: 2018-09-05 15:24    [W:0.136 / U:1.732 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site