lkml.org 
[lkml]   [2018]   [Sep]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 02/10] serial: uartps: Do not initialize field to zero again
Date
Writing zero and NULLs to already initialized fields is not needed.
Remove this additional writes.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

Changes in v3: None
Changes in v2:
- new patch - it can be sent separately too

drivers/tty/serial/xilinx_uartps.c | 3 ---
1 file changed, 3 deletions(-)

diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index dd905c981f67..9a08542cec47 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1502,15 +1502,12 @@ static int cdns_uart_probe(struct platform_device *pdev)

/* At this point, we've got an empty uart_port struct, initialize it */
spin_lock_init(&port->lock);
- port->membase = NULL;
- port->irq = 0;
port->type = PORT_UNKNOWN;
port->iotype = UPIO_MEM32;
port->flags = UPF_BOOT_AUTOCONF;
port->ops = &cdns_uart_ops;
port->fifosize = CDNS_UART_FIFO_SIZE;
port->line = id;
- port->dev = NULL;

/*
* Register the port.
--
1.9.1
\
 
 \ /
  Last update: 2018-09-03 15:12    [W:0.086 / U:0.964 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site