lkml.org 
[lkml]   [2018]   [Sep]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFT PATCH 2/2] pinctrl: spmi-mpp: Fix pmic_mpp_config_get() to be compliant
On Thu 30 Aug 08:23 PDT 2018, Douglas Anderson wrote:

> If you look at "pinconf-groups" in debugfs for ssbi-mpp you'll notice
> it looks like nonsense.
>
> The problem is fairly well described in commit 1cf86bc21257 ("pinctrl:
> qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant") and
> commit 05e0c828955c ("pinctrl: msm: Fix msm_config_group_get() to be
> compliant"), but it was pointed out that ssbi-mpp has the same
> problem. Let's fix it there too.
>
> NOTE: in case it's helpful to someone reading this, the way to tell
> whether to do the -EINVAL or not is to look at the PCONFDUMP for a
> given attribute. If the last element (has_arg) is false then you need
> to do the -EINVAL trick.
>
> ALSO NOTE: it seems unlikely that the values returned when we try to
> get PIN_CONFIG_BIAS_PULL_UP will actually be printed since "has_arg"
> is false for that one, but I guess it's still fine to return different
> values so I kept doing that. It seems like another driver (ssbi-gpio)
> uses a custom attribute (PM8XXX_QCOM_PULL_UP_STRENGTH) for something
> similar so maybe a future change should do that here too.
>
> Fixes: cfb24f6ebd38 ("pinctrl: Qualcomm SPMI PMIC MPP pin controller driver")
> Signed-off-by: Douglas Anderson <dianders@chromium.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> ---
>
> drivers/pinctrl/qcom/pinctrl-spmi-mpp.c | 19 ++++++++++++-------
> 1 file changed, 12 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
> index 6556dbeae65e..ce2950ffd525 100644
> --- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
> +++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
> @@ -343,13 +343,12 @@ static int pmic_mpp_config_get(struct pinctrl_dev *pctldev,
>
> switch (param) {
> case PIN_CONFIG_BIAS_DISABLE:
> - arg = pad->pullup == PMIC_MPP_PULL_UP_OPEN;
> + if (pad->pullup != PMIC_MPP_PULL_UP_OPEN)
> + return -EINVAL;
> + arg = 1;
> break;
> case PIN_CONFIG_BIAS_PULL_UP:
> switch (pad->pullup) {
> - case PMIC_MPP_PULL_UP_OPEN:
> - arg = 0;
> - break;
> case PMIC_MPP_PULL_UP_0P6KOHM:
> arg = 600;
> break;
> @@ -364,13 +363,17 @@ static int pmic_mpp_config_get(struct pinctrl_dev *pctldev,
> }
> break;
> case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
> - arg = !pad->is_enabled;
> + if (pad->is_enabled)
> + return -EINVAL;
> + arg = 1;
> break;
> case PIN_CONFIG_POWER_SOURCE:
> arg = pad->power_source;
> break;
> case PIN_CONFIG_INPUT_ENABLE:
> - arg = pad->input_enabled;
> + if (!pad->input_enabled)
> + return -EINVAL;
> + arg = 1;
> break;
> case PIN_CONFIG_OUTPUT:
> arg = pad->out_value;
> @@ -382,7 +385,9 @@ static int pmic_mpp_config_get(struct pinctrl_dev *pctldev,
> arg = pad->amux_input;
> break;
> case PMIC_MPP_CONF_PAIRED:
> - arg = pad->paired;
> + if (!pad->paired)
> + return -EINVAL;
> + arg = 1;
> break;
> case PIN_CONFIG_DRIVE_STRENGTH:
> arg = pad->drive_strength;
> --
> 2.19.0.rc0.228.g281dcd1b4d0-goog
>

\
 
 \ /
  Last update: 2018-09-03 23:01    [W:0.071 / U:0.912 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site