lkml.org 
[lkml]   [2018]   [Sep]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] ARM: dts: imx6: RDU2: Fix the audio CODEC's reset pin
On Fri, Aug 31, 2018 at 02:17:31PM -0500, Andrew F. Davis wrote:
> The correct DT property for specifying a GPIO used for reset
> is "reset-gpios", fix this here.
>
> Fixes: d763762e3b58 ("ARM: dts: imx6: add ZII RDU2 boards")

This Fixes tag and word 'Fix' in subject is inappropriate to me, as you
are not fixing something wrong from the beginning, but actually
replacing a deprecated property with new one.

Shawn

>
> Signed-off-by: Andrew F. Davis <afd@ti.com>
> ---
> arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
> index 7fff3717cf7c..a0f5cfda0055 100644
> --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
> @@ -384,7 +384,7 @@
> AVDD-supply = <&reg_3p3v>;
> IOVDD-supply = <&reg_3p3v>;
> DVDD-supply = <&vgen4_reg>;
> - gpio-reset = <&gpio1 2 GPIO_ACTIVE_HIGH>;
> + reset-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
> };
>
> accel@1c {
> @@ -572,7 +572,7 @@
> AVDD-supply = <&reg_3p3v>;
> IOVDD-supply = <&reg_3p3v>;
> DVDD-supply = <&vgen4_reg>;
> - gpio-reset = <&gpio1 0 GPIO_ACTIVE_HIGH>;
> + reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
> };
>
> touchscreen@20 {
> --
> 2.18.0
>

\
 
 \ /
  Last update: 2018-09-03 06:56    [W:0.044 / U:0.672 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site