lkml.org 
[lkml]   [2018]   [Sep]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/7] dmaengine: sprd: Fix the last link-list configuration
Date
From: Eric Long <eric.long@spreadtrum.com>

We will pass sglen as 0 configure the last link-list configuration
when filling the descriptor, which will cause the incorrect link-list
configuration. Thus we should check if the sglen is 0 to configure
the correct link-list configuration.

Signed-off-by: Eric Long <eric.long@spreadtrum.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
drivers/dma/sprd-dma.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
index 4f3587b..e6a74dc 100644
--- a/drivers/dma/sprd-dma.c
+++ b/drivers/dma/sprd-dma.c
@@ -697,7 +697,8 @@ static int sprd_dma_fill_desc(struct dma_chan *chan,
hw->cfg |= SPRD_DMA_LINKLIST_EN;

/* link-list index */
- temp = (sg_index + 1) % sglen;
+ temp = sglen ? (sg_index + 1) % sglen : 0;
+
/* Next link-list configuration's physical address offset */
temp = temp * sizeof(*hw) + SPRD_DMA_CHN_SRC_ADDR;
/*
--
1.7.9.5
\
 
 \ /
  Last update: 2018-09-29 07:51    [W:2.217 / U:0.536 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site