lkml.org 
[lkml]   [2018]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH V5 18/30] dt-bindings: csky CPU Bindings
On Thu, Sep 27, 2018 at 8:03 PM Guo Ren <ren_guo@c-sky.com> wrote:
>
> On Thu, Sep 27, 2018 at 11:43:17AM -0500, Rob Herring wrote:
> > On Tue, Sep 25, 2018 at 07:39:21AM +0800, Guo Ren wrote:
> > > This patch adds the documentation to describe that how to add cpu nodes in
> > > dts for SMP.
> > >
> > > Signed-off-by: Guo Ren <ren_guo@c-sky.com>
> > > ---
> > > Documentation/devicetree/bindings/csky/cpus.txt | 70 +++++++++++++++++++++++++
> > > 1 file changed, 70 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/csky/cpus.txt
> > >
> > > diff --git a/Documentation/devicetree/bindings/csky/cpus.txt b/Documentation/devicetree/bindings/csky/cpus.txt
> > > new file mode 100644
> > > index 0000000..ee3901d
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/csky/cpus.txt
> > > @@ -0,0 +1,70 @@
> > > +==================
> > > +C-SKY CPU Bindings
> > > +==================
> > > +
> > > +The device tree allows to describe the layout of CPUs in a system through
> > > +the "cpus" node, which in turn contains a number of subnodes (ie "cpu")
> > > +defining properties for every cpu.
> > > +
> > > +Only SMP system need to care about the cpus node and single processor
> > > +needn't define cpus node at all.
> >
> > We've generally found this is not true. Even for single core, you can
> > have power domains, clocks for DVFS, etc.
> Ok, I'll remove it.
>
> >
> > > +
> > > +=====================================
> > > +cpus and cpu node bindings definition
> > > +=====================================
> > > +
> > > +- cpus node
> > > +
> > > + Description: Container of cpu nodes
> > > +
> > > + The node name must be "cpus".
> > > +
> > > + A cpus node must define the following properties:
> > > +
> > > + - #address-cells
> > > + Usage: required
> > > + Value type: <u32>
> > > + Definition: must be set to 1
> > > + - #size-cells
> > > + Usage: required
> > > + Value type: <u32>
> > > + Definition: must be set to 0
> > > +
> > > +- cpu node
> > > +
> > > + Description: Describes one of SMP cores
> > > +
> > > + PROPERTIES
> > > +
> >
> > You need a compatible property for cpu nodes.
> Our cpu is defined in defconfig, not in dts. I could put a comatible
> property in here, but it's no use in code.

It doesn't matter as that could change. Most arches do run-time
selection of cpus within a range of compatible cores.

And read the DT spec (devicetree.org) which says compatible is
required for cpu nodes.

Rob

\
 
 \ /
  Last update: 2018-09-28 13:33    [W:0.067 / U:0.580 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site