lkml.org 
[lkml]   [2018]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 2/2] iio: proximity: vl53l0x: add interrupt support
On Wed, Sep 26, 2018 at 05:46:18PM -0500, Rob Herring wrote:
> On Sat, Sep 22, 2018 at 04:05:23PM +0100, Jonathan Cameron wrote:
> > On Tue, 18 Sep 2018 16:24:22 +0800
> > Song Qiang <songqiang1304521@gmail.com> wrote:
> >
> > > The first version of this driver issues a measuring request and polling
> > > for a status register in the device for measuring completes.
> > > vl53l0x support configuring GPIO1 on it to generate interrupt to
> > > indicate that new measurement is ready. This patch adds support for
> > > using this mechanisim to reduce cpu cost.
> > >
> > > Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
> > Hi Song.
> >
> > Looks correct in principal but a few things to tidy up before
> > this is ready to apply.
> >
> > Also we have an unrelated change in here to check the devices ID.
> > That should be in it's own patch.
> >
> > Thanks,
> >
> > Jonathan
> > > ---
> > > .../bindings/iio/proximity/vl53l0x.txt | 14 +-
>
> This should have been split with the complete binding in one patch
> rather than piecemeal driver feature by feature.
>

Hi Rob,

A few days ago when I was submitting this driver, I didn't do it very
well, the function of this driver is limited. I added interrupt support
the next day after you acked my first patch. I thought it's not polite
to add something after someone acked that patch, so I send the interrupt
support as a second patch. The first patch is merged to togreg now, but
this doesn't. I don't know when can I add new functions to the code that
just merged to togreg branch, could you offer some suggestions?

> > > drivers/iio/proximity/vl53l0x-i2c.c | 135 +++++++++++++++---
> > > 2 files changed, 129 insertions(+), 20 deletions(-)
> > >
> > > diff --git a/Documentation/devicetree/bindings/iio/proximity/vl53l0x.txt b/Documentation/devicetree/bindings/iio/proximity/vl53l0x.txt
> > > index ab9a9539fec4..40290f8dd70f 100644
> > > --- a/Documentation/devicetree/bindings/iio/proximity/vl53l0x.txt
> > > +++ b/Documentation/devicetree/bindings/iio/proximity/vl53l0x.txt
> > > @@ -4,9 +4,21 @@ Required properties:
> > > - compatible: must be "st,vl53l0x-i2c"
>
> Is there more than one interface on this device, such as SPI? If not,
> then '-i2c' should be dropped.
>

Yes, there is a CCI(Camera Control Interface) for communication.

> > > - reg: i2c address where to find the device
> > >
> > > +Optional properties:
> > > + - interrupts : Interrupt line receiving GPIO1's measuring complete
> > > + output, supports IRQ_TYPE_EDGE_FALLING only.
> > > +
> > > + Refer to interrupt-controller/interrupts.txt for generic
> > > + interrupt client node bindings.
> > > +
> > > Example:
> > >
> > > vl53l0x@29 {
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&vl53l0x_pins>;
> > > +
> > Please drop this from the example. This is board specific rather than
> > being generally required.
> >

Sure.

yours,
Song Qiang
> > > compatible = "st,vl53l0x-i2c";
> > > reg = <0x29>;
> > > -};
> > > + interrupt-parent = <&gpio3>;
> > > + interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
> > > +}

\
 
 \ /
  Last update: 2018-09-28 11:37    [W:0.153 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site