Messages in this thread | | | Date | Wed, 26 Sep 2018 17:57:54 -0500 | From | Rob Herring <> | Subject | Re: [PATCH v2 1/7] dt-bindings: mfd: Add ST Multi-Function eXpander (STMFX) core bindings |
| |
On Wed, Sep 19, 2018 at 03:27:43PM +0200, Amelie Delaunay wrote: > This patch adds documentation of device tree bindings for the > STMicroelectronics Multi-Function eXpander (STMFX) MFD core. > > Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> > --- > Documentation/devicetree/bindings/mfd/stmfx.txt | 28 +++++++++++++++++++++++++ > 1 file changed, 28 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/stmfx.txt > > diff --git a/Documentation/devicetree/bindings/mfd/stmfx.txt b/Documentation/devicetree/bindings/mfd/stmfx.txt > new file mode 100644 > index 0000000..21cf798 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/stmfx.txt > @@ -0,0 +1,28 @@ > +STMicroelectonics Multi-Function eXpander (STMFX) Core bindings > + > +ST Multi-Function eXpander (STMFX) is a slave controller using I2C for > +communication with the main MCU. Its main features are GPIO expansion, main > +MCU IDD measurement (IDD is the amount of current that flows through VDD) and > +resistive touchscreen controller. > + > +Required properties: > +- compatible: should be "st,stmfx-0300". > +- reg: I2C slave address of the device. > +- interrupt-parent: phandle of the STMFX parent interrupt controller.
Drop this. It is implied and could be in the parent.
> +- interrutps: interrupt specifier triggered by MFX_IRQ_OUT signal.
typo
> + > +Optional properties: > +- drive-open-drain: configure MFX_IRQ_OUT as open drain. > +- vdd-supply: phandle of the regulator supplying STMFX. > + > +Example: > + > + stmfx: stmfx@42 { > + compatible = "st,stmfx-0300"; > + reg = <0x42>; > + interrupts = <8 IRQ_TYPE_EDGE_RISING>; > + interrupt-parent = <&gpioi>; > + vdd-supply = <&v3v3>; > + }; > + > +Please refer to ../pinctrl/pinctrl-stmfx.txt for STMFX GPIO expander function bindings. > -- > 2.7.4 >
| |