lkml.org 
[lkml]   [2018]   [Sep]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 14/14] dt-bindings: serial: lantiq: Add optional properties for CCF
Date
Clocks and clock-names are updated in device tree binding.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com>
---

Documentation/devicetree/bindings/serial/lantiq_asc.txt | 15 +++++++++++++++
1 file changed, 15 insertions(+)

diff --git a/Documentation/devicetree/bindings/serial/lantiq_asc.txt b/Documentation/devicetree/bindings/serial/lantiq_asc.txt
index 3acbd309ab9d..40e81a5818f6 100644
--- a/Documentation/devicetree/bindings/serial/lantiq_asc.txt
+++ b/Documentation/devicetree/bindings/serial/lantiq_asc.txt
@@ -6,8 +6,23 @@ Required properties:
- interrupts: the 3 (tx rx err) interrupt numbers. The interrupt specifier
depends on the interrupt-parent interrupt controller.

+Optional properties:
+- clocks: Should contain frequency clock and gate clock
+- clock-names: Should be "freq" and "asc"
+
Example:

+asc0: serial@16600000 {
+ compatible = "lantiq,asc";
+ reg = <0x16600000 0x100000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cgu CLK_SSX4>, <&cgu GCLK_UART>;
+ clock-names = "freq", "asc";
+};
+
asc1: serial@e100c00 {
compatible = "lantiq,asc";
reg = <0xE100C00 0x400>;
--
2.11.0
\
 
 \ /
  Last update: 2018-09-24 12:30    [W:0.142 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site