lkml.org 
[lkml]   [2018]   [Sep]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] i2c: aspeed: Acknowledge most interrupts early in interrupt handler
On Thu, Sep 13, 2018 at 08:30:10PM -0700, Guenter Roeck wrote:
> Commit 3e9efc3299dd ("i2c: aspeed: Handle master/slave combined irq events
> properly") moved interrupt acknowledgment to the end of the interrupt
> handler. In part this was done because the AST2500 datasheet says:
>
> I2CD10 Interrupt Status Register
> bit 2 Receive Done Interrupt status
> S/W needs to clear this status bit to allow next data receiving.
>
> Acknowledging Receive Done before receive data was handled resulted in
> receive errors on high speed I2C busses.
>
> However, interrupt acknowledgment was not only moved to the end of the
> interrupt handler for Receive Done Interrupt status, but for all interrupt
> status bits. This could result in race conditions if a second interrupt was
> received during interrupt handling and not handled but still acknowledged
> at the end of the interrupt handler.
>
> Acknowledge only "Receive Done Interrupt status" late in the interrupt
> handler to solve the problem.
>
> Fixes: 3e9efc3299dd ("i2c: aspeed: Handle master/slave combined irq events properly")
> Cc: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
> Cc: Joel Stanley <joel@jms.id.au>
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Applied to for-next, thanks!

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-09-24 23:46    [W:0.060 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site