lkml.org 
[lkml]   [2018]   [Sep]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net 5/7] r8152: Check for supported Wake-on-LAN Modes
Date
The driver does not check for Wake-on-LAN modes specified by an user,
but will conditionally set the device as wake-up enabled or not based on
that, which could be a very confusing user experience.

Fixes: 21ff2e8976b1 ("r8152: support WOL")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/usb/r8152.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 2cd71bdb6484..f1b5201cc320 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -4506,6 +4506,9 @@ static int rtl8152_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
if (!rtl_can_wakeup(tp))
return -EOPNOTSUPP;

+ if (wol->wolopts & ~WAKE_ANY)
+ return -EINVAL;
+
ret = usb_autopm_get_interface(tp->intf);
if (ret < 0)
goto out_set_wol;
--
2.17.1
\
 
 \ /
  Last update: 2018-09-24 22:56    [W:2.200 / U:1.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site