lkml.org 
[lkml]   [2018]   [Sep]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3] Bluetooth: hci_qca: Add poweroff support during hci down for wcn3990
Date
This patch enables power off support for hci down and power on support
for hci up. As wcn3990 power sources are ignited by regulators, we will
turn off them during hci down, i.e. an complete power off of wcn3990.
So while hci up, will call vendor setup which will turn on the regulators,
requests BT chip version and download the firmware.

Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
---
v3:
* addressed reviewer comments.
v2:
* Removed vendor specific hdev->open and close functions.
* Added hdev->shutdown function to turn off the regs.

v1:
* initial patch.
---
drivers/bluetooth/hci_qca.c | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 74f5fede0274..d98ed0442201 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -168,6 +168,7 @@ struct qca_serdev {

static int qca_power_setup(struct hci_uart *hu, bool on);
static void qca_power_shutdown(struct hci_uart *hu);
+static int qca_power_off(struct hci_dev *hdev);

static void __serial_clock_on(struct tty_struct *tty)
{
@@ -1099,8 +1100,26 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
static int qca_wcn3990_init(struct hci_uart *hu)
{
struct hci_dev *hdev = hu->hdev;
+ struct qca_serdev *qcadev;
int ret;

+ /* Check for vregs status, may be hci down has turned
+ * off the voltage regulator.
+ */
+ qcadev = serdev_device_get_drvdata(hu->serdev);
+ if (!qcadev->bt_power->vregs_on) {
+ serdev_device_close(hu->serdev);
+ ret = qca_power_setup(hu, true);
+ if (ret)
+ return ret;
+
+ ret = serdev_device_open(hu->serdev);
+ if (ret) {
+ bt_dev_err(hu->hdev, "failed to open port");
+ return ret;
+ }
+ }
+
/* Forcefully enable wcn3990 to enter in to boot mode. */
host_set_baudrate(hu, 2400);
ret = qca_send_power_pulse(hdev, QCA_WCN3990_POWEROFF_PULSE);
@@ -1152,6 +1171,12 @@ static int qca_setup(struct hci_uart *hu)

if (qcadev->btsoc_type == QCA_WCN3990) {
bt_dev_info(hdev, "setting up wcn3990");
+
+ /* Enable NON_PERSISTENT_SETUP QUIRK to ensure to execute
+ * setup for every hci up.
+ */
+ set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
+ hu->hdev->shutdown = qca_power_off;
ret = qca_wcn3990_init(hu);
if (ret)
return ret;
@@ -1242,6 +1267,14 @@ static void qca_power_shutdown(struct hci_uart *hu)
qca_power_setup(hu, false);
}

+static int qca_power_off(struct hci_dev *hdev)
+{
+ struct hci_uart *hu = hci_get_drvdata(hdev);
+
+ qca_power_shutdown(hu);
+ return 0;
+}
+
static int qca_enable_regulator(struct qca_vreg vregs,
struct regulator *regulator)
{
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
\
 
 \ /
  Last update: 2018-09-24 16:46    [W:0.331 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site