lkml.org 
[lkml]   [2018]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 1/2] dt-bindings: hwmon: Add ina3221 documentation
On Sat, Sep 22, 2018 at 10:45:49PM -0700, Guenter Roeck wrote:
> On 09/22/2018 10:31 PM, Nicolin Chen wrote:
> > On Sat, Sep 22, 2018 at 10:19:42PM -0700, Guenter Roeck wrote:
> > > > +2) child nodes
> > > > + Required properties:
> > > > + - input-id: Must be 1, 2 or 3
> > > > +
> > > > + Optional properties:
> > > > + - input-label: Name of the input source
> > > > + - shunt-resistor: Shunt resistor value in micro-Ohm
> > > > + - status: Should be "disabled" if no input source
> > > > +
> > > > + Example:
> > > > +
> > > > + input1 {
> > > > + input-id = <0x1>;
> > >
> > > We'll have to find a better name for this. Feel free to look up examples in the
> > > existing devicetree descriptions. The one that seems to be used most of the time
> > > to indicate a channel index or id is "reg". It should also start with 0 - there
> > > is no real reason for it to start with 1; it only makes the code more complex.
> >
> > The reason is that the port start from 1 in the datasheet.
> >
>
> Maybe, but for me I'll want to have something that we can reuse for other chips.
> Having the index start with 0 for one chip and with 1 for another would be
> confusing. It is bad enough that we have in[0..n] for voltages and temp[1..n]
> for temperatures. I would not want to see the same in devicetree files,
> and much less so on a per-device basis. It is also pretty common to start
> channel numbers with 0 in devicetree files.

Understood. I search a bit and saw most of "*-id" start from 0,
although I cannot be sure whether their Datasheet/RM/schematics
are counting from 0 or 1.

And I also found a transposing example:
Documentation/devicetree/bindings/serial/mrvl,pxa-ssp.txt

Probably should be better to wait for doc maintainers' input.

Thanks
Nicolin

\
 
 \ /
  Last update: 2018-09-23 08:03    [W:0.078 / U:0.512 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site