lkml.org 
[lkml]   [2018]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] iio: light: bh1750: Add device tree support
On Thu, Sep 20, 2018 at 09:37:21PM -0400, r yang wrote:
> On Wed, Sep 19, 2018 at 09:22:39PM +0200, Tomasz Duszynski wrote:
> > Comments inline.
> >
> > On Sat, Sep 15, 2018 at 01:42:14PM -0400, ryang wrote:
> > > Add device tree support for ROHM BH1750 series ambient light sensors.
> > >
> > > Signed-off-by: ryang <decatf@gmail.com>
> > > ---
> > > drivers/iio/light/bh1750.c | 10 ++++++++++
> > > 1 file changed, 10 insertions(+)
> > >
> > > diff --git a/drivers/iio/light/bh1750.c b/drivers/iio/light/bh1750.c
> > > index a814828e69f5..50b599abb383 100644
> > > --- a/drivers/iio/light/bh1750.c
> > > +++ b/drivers/iio/light/bh1750.c
> > > @@ -315,9 +315,19 @@ static const struct i2c_device_id bh1750_id[] = {
> > > };
> > > MODULE_DEVICE_TABLE(i2c, bh1750_id);
> > >
> > > +static const struct of_device_id bh1750_of_match[] = {
> > > + { .compatible = "rohm,bh1710", },
> > > + { .compatible = "rohm,bh1715", },
> > > + { .compatible = "rohm,bh1721", },
> > > + { .compatible = "rohm,bh1750", },
> > > + { .compatible = "rohm,bh1751", },
> > > + { }
> > > +};
> > > +
> >
> > Hmm, I believe this should be exported additionally using
> > MODULE_DEVICE_TABLE(of, bh1750_of_match). Otherwise module loading
> > will not work as expected.
> >
> > Moreover, we can do without DT and if you want to avoid
> > warning about unused variables you may consider enclosing everything
> > with:
> >
> > #ifdef CONFIG_OF
> > ...
> > #endif
>
> The reason for this DT patch is because I've ported the Samsung Galaxy
> Tab 10.1 to the mainline kernel. The device is working on the Tegra
> platform with the right DTS file. Some peripherals on this device have
> existing drivers such as this one which only need the DT bindings for
> it be usuable.
>

Adding support for DT is fine. Just pointed a figner at two things
that attracted my attention.

> >
> > > static struct i2c_driver bh1750_driver = {
> > > .driver = {
> > > .name = "bh1750",
> > > + .of_match_table = of_match_ptr(bh1750_of_match),
> > > .pm = BH1750_PM_OPS,
> >
> > I've recently simplified setting pm ops so this would not apply to
> > iio/togreg cleanly.
> >
>
> Does this mean I should wait until that is merged before submitting a V2
> patch?
>

No need to wait. I guess you should rebase your work on iio/togreg
branch and post v2.

> > > },
> > > .probe = bh1750_probe,
> > > --
> > > 2.17.1
> > >

\
 
 \ /
  Last update: 2018-09-21 17:37    [W:0.049 / U:3.748 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site