lkml.org 
[lkml]   [2018]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: [PATCH v2 06/11] arm: dts: hip04: Update coresight bindings for hardware ports
    From
    Date
    Hi Suzuki,

    On 2018/9/12 14:53, Suzuki K Poulose wrote:
    > Switch to the new the hardware port bindings.
    >
    > Cc: Wei Xu <xuwei5@hisilicon.com>
    > Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
    > Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>

    Thanks!
    Applied to the hisilicon dt tree.

    Best Regards,
    Wei

    > ---
    > arch/arm/boot/dts/hip04.dtsi | 346 ++++++++++++++++++-----------------
    > 1 file changed, 176 insertions(+), 170 deletions(-)
    >
    > diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi
    > index 44044f275115..0f917b272ff3 100644
    > --- a/arch/arm/boot/dts/hip04.dtsi
    > +++ b/arch/arm/boot/dts/hip04.dtsi
    > @@ -277,10 +277,11 @@
    >
    > clocks = <&clk_375m>;
    > clock-names = "apb_pclk";
    > - port {
    > - etb0_in_port: endpoint@0 {
    > - slave-mode;
    > - remote-endpoint = <&replicator0_out_port0>;
    > + in-ports {
    > + port {
    > + etb0_in_port: endpoint@0 {
    > + remote-endpoint = <&replicator0_out_port0>;
    > + };
    > };
    > };
    > };
    > @@ -291,10 +292,11 @@
    >
    > clocks = <&clk_375m>;
    > clock-names = "apb_pclk";
    > - port {
    > - etb1_in_port: endpoint@0 {
    > - slave-mode;
    > - remote-endpoint = <&replicator1_out_port0>;
    > + in-ports {
    > + port {
    > + etb1_in_port: endpoint@0 {
    > + remote-endpoint = <&replicator1_out_port0>;
    > + };
    > };
    > };
    > };
    > @@ -305,10 +307,11 @@
    >
    > clocks = <&clk_375m>;
    > clock-names = "apb_pclk";
    > - port {
    > - etb2_in_port: endpoint@0 {
    > - slave-mode;
    > - remote-endpoint = <&replicator2_out_port0>;
    > + in-ports {
    > + port {
    > + etb2_in_port: endpoint@0 {
    > + remote-endpoint = <&replicator2_out_port0>;
    > + };
    > };
    > };
    > };
    > @@ -319,10 +322,11 @@
    >
    > clocks = <&clk_375m>;
    > clock-names = "apb_pclk";
    > - port {
    > - etb3_in_port: endpoint@0 {
    > - slave-mode;
    > - remote-endpoint = <&replicator3_out_port0>;
    > + in-ports {
    > + port {
    > + etb3_in_port: endpoint@0 {
    > + remote-endpoint = <&replicator3_out_port0>;
    > + };
    > };
    > };
    > };
    > @@ -333,10 +337,11 @@
    >
    > clocks = <&clk_375m>;
    > clock-names = "apb_pclk";
    > - port {
    > - tpiu_in_port: endpoint@0 {
    > - slave-mode;
    > - remote-endpoint = <&funnel4_out_port0>;
    > + in-ports {
    > + port {
    > + tpiu_in_port: endpoint@0 {
    > + remote-endpoint = <&funnel4_out_port0>;
    > + };
    > };
    > };
    > };
    > @@ -347,7 +352,7 @@
    > */
    > compatible = "arm,coresight-replicator";
    >
    > - ports {
    > + out-ports {
    > #address-cells = <1>;
    > #size-cells = <0>;
    >
    > @@ -365,12 +370,11 @@
    > remote-endpoint = <&funnel4_in_port0>;
    > };
    > };
    > + };
    >
    > - /* replicator input port */
    > - port@2 {
    > - reg = <0>;
    > + in-ports {
    > + port {
    > replicator0_in_port0: endpoint {
    > - slave-mode;
    > remote-endpoint = <&funnel0_out_port0>;
    > };
    > };
    > @@ -383,7 +387,7 @@
    > */
    > compatible = "arm,coresight-replicator";
    >
    > - ports {
    > + out-ports {
    > #address-cells = <1>;
    > #size-cells = <0>;
    >
    > @@ -401,12 +405,11 @@
    > remote-endpoint = <&funnel4_in_port1>;
    > };
    > };
    > + };
    >
    > - /* replicator input port */
    > - port@2 {
    > - reg = <0>;
    > + in-ports {
    > + port {
    > replicator1_in_port0: endpoint {
    > - slave-mode;
    > remote-endpoint = <&funnel1_out_port0>;
    > };
    > };
    > @@ -419,11 +422,10 @@
    > */
    > compatible = "arm,coresight-replicator";
    >
    > - ports {
    > + out-ports {
    > #address-cells = <1>;
    > #size-cells = <0>;
    >
    > - /* replicator output ports */
    > port@0 {
    > reg = <0>;
    > replicator2_out_port0: endpoint {
    > @@ -437,12 +439,11 @@
    > remote-endpoint = <&funnel4_in_port2>;
    > };
    > };
    > + };
    >
    > - /* replicator input port */
    > - port@2 {
    > - reg = <0>;
    > + in-ports {
    > + port {
    > replicator2_in_port0: endpoint {
    > - slave-mode;
    > remote-endpoint = <&funnel2_out_port0>;
    > };
    > };
    > @@ -455,11 +456,10 @@
    > */
    > compatible = "arm,coresight-replicator";
    >
    > - ports {
    > + out-ports {
    > #address-cells = <1>;
    > #size-cells = <0>;
    >
    > - /* replicator output ports */
    > port@0 {
    > reg = <0>;
    > replicator3_out_port0: endpoint {
    > @@ -473,12 +473,11 @@
    > remote-endpoint = <&funnel4_in_port3>;
    > };
    > };
    > + };
    >
    > - /* replicator input port */
    > - port@2 {
    > - reg = <0>;
    > + in-ports {
    > + port {
    > replicator3_in_port0: endpoint {
    > - slave-mode;
    > remote-endpoint = <&funnel3_out_port0>;
    > };
    > };
    > @@ -491,48 +490,43 @@
    >
    > clocks = <&clk_375m>;
    > clock-names = "apb_pclk";
    > - ports {
    > - #address-cells = <1>;
    > - #size-cells = <0>;
    > -
    > - /* funnel output port */
    > - port@0 {
    > - reg = <0>;
    > + out-ports {
    > + port {
    > funnel0_out_port0: endpoint {
    > remote-endpoint =
    > <&replicator0_in_port0>;
    > };
    > };
    > + };
    >
    > - /* funnel input ports */
    > - port@1 {
    > + in-ports {
    > + #address-cells = <1>;
    > + #size-cells = <0>;
    > +
    > + port@0 {
    > reg = <0>;
    > funnel0_in_port0: endpoint {
    > - slave-mode;
    > remote-endpoint = <&ptm0_out_port>;
    > };
    > };
    >
    > - port@2 {
    > + port@1 {
    > reg = <1>;
    > funnel0_in_port1: endpoint {
    > - slave-mode;
    > remote-endpoint = <&ptm1_out_port>;
    > };
    > };
    >
    > - port@3 {
    > + port@2 {
    > reg = <2>;
    > funnel0_in_port2: endpoint {
    > - slave-mode;
    > remote-endpoint = <&ptm2_out_port>;
    > };
    > };
    >
    > - port@4 {
    > + port@3 {
    > reg = <3>;
    > funnel0_in_port3: endpoint {
    > - slave-mode;
    > remote-endpoint = <&ptm3_out_port>;
    > };
    > };
    > @@ -545,48 +539,43 @@
    >
    > clocks = <&clk_375m>;
    > clock-names = "apb_pclk";
    > - ports {
    > - #address-cells = <1>;
    > - #size-cells = <0>;
    > -
    > - /* funnel output port */
    > - port@0 {
    > - reg = <0>;
    > + out-ports {
    > + port {
    > funnel1_out_port0: endpoint {
    > remote-endpoint =
    > <&replicator1_in_port0>;
    > };
    > };
    > + };
    >
    > - /* funnel input ports */
    > - port@1 {
    > + in-ports {
    > + #address-cells = <1>;
    > + #size-cells = <0>;
    > +
    > + port@0 {
    > reg = <0>;
    > funnel1_in_port0: endpoint {
    > - slave-mode;
    > remote-endpoint = <&ptm4_out_port>;
    > };
    > };
    >
    > - port@2 {
    > + port@1 {
    > reg = <1>;
    > funnel1_in_port1: endpoint {
    > - slave-mode;
    > remote-endpoint = <&ptm5_out_port>;
    > };
    > };
    >
    > - port@3 {
    > + port@2 {
    > reg = <2>;
    > funnel1_in_port2: endpoint {
    > - slave-mode;
    > remote-endpoint = <&ptm6_out_port>;
    > };
    > };
    >
    > - port@4 {
    > + port@3 {
    > reg = <3>;
    > funnel1_in_port3: endpoint {
    > - slave-mode;
    > remote-endpoint = <&ptm7_out_port>;
    > };
    > };
    > @@ -599,48 +588,43 @@
    >
    > clocks = <&clk_375m>;
    > clock-names = "apb_pclk";
    > - ports {
    > - #address-cells = <1>;
    > - #size-cells = <0>;
    > -
    > - /* funnel output port */
    > - port@0 {
    > - reg = <0>;
    > + out-ports {
    > + port {
    > funnel2_out_port0: endpoint {
    > remote-endpoint =
    > <&replicator2_in_port0>;
    > };
    > };
    > + };
    >
    > - /* funnel input ports */
    > - port@1 {
    > + in-ports {
    > + #address-cells = <1>;
    > + #size-cells = <0>;
    > +
    > + port@0 {
    > reg = <0>;
    > funnel2_in_port0: endpoint {
    > - slave-mode;
    > remote-endpoint = <&ptm8_out_port>;
    > };
    > };
    >
    > - port@2 {
    > + port@1 {
    > reg = <1>;
    > funnel2_in_port1: endpoint {
    > - slave-mode;
    > remote-endpoint = <&ptm9_out_port>;
    > };
    > };
    >
    > - port@3 {
    > + port@2 {
    > reg = <2>;
    > funnel2_in_port2: endpoint {
    > - slave-mode;
    > remote-endpoint = <&ptm10_out_port>;
    > };
    > };
    >
    > - port@4 {
    > + port@3 {
    > reg = <3>;
    > funnel2_in_port3: endpoint {
    > - slave-mode;
    > remote-endpoint = <&ptm11_out_port>;
    > };
    > };
    > @@ -653,48 +637,43 @@
    >
    > clocks = <&clk_375m>;
    > clock-names = "apb_pclk";
    > - ports {
    > - #address-cells = <1>;
    > - #size-cells = <0>;
    > -
    > - /* funnel output port */
    > - port@0 {
    > - reg = <0>;
    > + out-ports {
    > + port {
    > funnel3_out_port0: endpoint {
    > remote-endpoint =
    > <&replicator3_in_port0>;
    > };
    > };
    > + };
    >
    > - /* funnel input ports */
    > - port@1 {
    > + in-ports {
    > + #address-cells = <1>;
    > + #size-cells = <0>;
    > +
    > + port@0 {
    > reg = <0>;
    > funnel3_in_port0: endpoint {
    > - slave-mode;
    > remote-endpoint = <&ptm12_out_port>;
    > };
    > };
    >
    > - port@2 {
    > + port@1 {
    > reg = <1>;
    > funnel3_in_port1: endpoint {
    > - slave-mode;
    > remote-endpoint = <&ptm13_out_port>;
    > };
    > };
    >
    > - port@3 {
    > + port@2 {
    > reg = <2>;
    > funnel3_in_port2: endpoint {
    > - slave-mode;
    > remote-endpoint = <&ptm14_out_port>;
    > };
    > };
    >
    > - port@4 {
    > + port@3 {
    > reg = <3>;
    > funnel3_in_port3: endpoint {
    > - slave-mode;
    > remote-endpoint = <&ptm15_out_port>;
    > };
    > };
    > @@ -707,50 +686,45 @@
    >
    > clocks = <&clk_375m>;
    > clock-names = "apb_pclk";
    > - ports {
    > - #address-cells = <1>;
    > - #size-cells = <0>;
    > -
    > - /* funnel output port */
    > - port@0 {
    > - reg = <0>;
    > + out-ports {
    > + port {
    > funnel4_out_port0: endpoint {
    > remote-endpoint = <&tpiu_in_port>;
    > };
    > };
    > + };
    >
    > - /* funnel input ports */
    > - port@1 {
    > + in-ports {
    > + #address-cells = <1>;
    > + #size-cells = <0>;
    > +
    > + port@0 {
    > reg = <0>;
    > funnel4_in_port0: endpoint {
    > - slave-mode;
    > remote-endpoint =
    > <&replicator0_out_port1>;
    > };
    > };
    >
    > - port@2 {
    > + port@1 {
    > reg = <1>;
    > funnel4_in_port1: endpoint {
    > - slave-mode;
    > remote-endpoint =
    > <&replicator1_out_port1>;
    > };
    > };
    >
    > - port@3 {
    > + port@2 {
    > reg = <2>;
    > funnel4_in_port2: endpoint {
    > - slave-mode;
    > remote-endpoint =
    > <&replicator2_out_port1>;
    > };
    > };
    >
    > - port@4 {
    > + port@3 {
    > reg = <3>;
    > funnel4_in_port3: endpoint {
    > - slave-mode;
    > remote-endpoint =
    > <&replicator3_out_port1>;
    > };
    > @@ -765,9 +739,11 @@
    > clocks = <&clk_375m>;
    > clock-names = "apb_pclk";
    > cpu = <&CPU0>;
    > - port {
    > - ptm0_out_port: endpoint {
    > - remote-endpoint = <&funnel0_in_port0>;
    > + out-ports {
    > + port {
    > + ptm0_out_port: endpoint {
    > + remote-endpoint = <&funnel0_in_port0>;
    > + };
    > };
    > };
    > };
    > @@ -779,9 +755,11 @@
    > clocks = <&clk_375m>;
    > clock-names = "apb_pclk";
    > cpu = <&CPU1>;
    > - port {
    > - ptm1_out_port: endpoint {
    > - remote-endpoint = <&funnel0_in_port1>;
    > + out-ports {
    > + port {
    > + ptm1_out_port: endpoint {
    > + remote-endpoint = <&funnel0_in_port1>;
    > + };
    > };
    > };
    > };
    > @@ -793,9 +771,11 @@
    > clocks = <&clk_375m>;
    > clock-names = "apb_pclk";
    > cpu = <&CPU2>;
    > - port {
    > - ptm2_out_port: endpoint {
    > - remote-endpoint = <&funnel0_in_port2>;
    > + out-ports {
    > + port {
    > + ptm2_out_port: endpoint {
    > + remote-endpoint = <&funnel0_in_port2>;
    > + };
    > };
    > };
    > };
    > @@ -807,9 +787,11 @@
    > clocks = <&clk_375m>;
    > clock-names = "apb_pclk";
    > cpu = <&CPU3>;
    > - port {
    > - ptm3_out_port: endpoint {
    > - remote-endpoint = <&funnel0_in_port3>;
    > + out-ports {
    > + port {
    > + ptm3_out_port: endpoint {
    > + remote-endpoint = <&funnel0_in_port3>;
    > + };
    > };
    > };
    > };
    > @@ -821,9 +803,11 @@
    > clocks = <&clk_375m>;
    > clock-names = "apb_pclk";
    > cpu = <&CPU4>;
    > - port {
    > - ptm4_out_port: endpoint {
    > - remote-endpoint = <&funnel1_in_port0>;
    > + out-ports {
    > + port {
    > + ptm4_out_port: endpoint {
    > + remote-endpoint = <&funnel1_in_port0>;
    > + };
    > };
    > };
    > };
    > @@ -835,9 +819,11 @@
    > clocks = <&clk_375m>;
    > clock-names = "apb_pclk";
    > cpu = <&CPU5>;
    > - port {
    > - ptm5_out_port: endpoint {
    > - remote-endpoint = <&funnel1_in_port1>;
    > + out-ports {
    > + port {
    > + ptm5_out_port: endpoint {
    > + remote-endpoint = <&funnel1_in_port1>;
    > + };
    > };
    > };
    > };
    > @@ -849,9 +835,11 @@
    > clocks = <&clk_375m>;
    > clock-names = "apb_pclk";
    > cpu = <&CPU6>;
    > - port {
    > - ptm6_out_port: endpoint {
    > - remote-endpoint = <&funnel1_in_port2>;
    > + out-ports {
    > + port {
    > + ptm6_out_port: endpoint {
    > + remote-endpoint = <&funnel1_in_port2>;
    > + };
    > };
    > };
    > };
    > @@ -863,9 +851,11 @@
    > clocks = <&clk_375m>;
    > clock-names = "apb_pclk";
    > cpu = <&CPU7>;
    > - port {
    > - ptm7_out_port: endpoint {
    > - remote-endpoint = <&funnel1_in_port3>;
    > + out-ports {
    > + port {
    > + ptm7_out_port: endpoint {
    > + remote-endpoint = <&funnel1_in_port3>;
    > + };
    > };
    > };
    > };
    > @@ -877,9 +867,11 @@
    > clocks = <&clk_375m>;
    > clock-names = "apb_pclk";
    > cpu = <&CPU8>;
    > - port {
    > - ptm8_out_port: endpoint {
    > - remote-endpoint = <&funnel2_in_port0>;
    > + out-ports {
    > + port {
    > + ptm8_out_port: endpoint {
    > + remote-endpoint = <&funnel2_in_port0>;
    > + };
    > };
    > };
    > };
    > @@ -890,9 +882,11 @@
    > clocks = <&clk_375m>;
    > clock-names = "apb_pclk";
    > cpu = <&CPU9>;
    > - port {
    > - ptm9_out_port: endpoint {
    > - remote-endpoint = <&funnel2_in_port1>;
    > + out-ports {
    > + port {
    > + ptm9_out_port: endpoint {
    > + remote-endpoint = <&funnel2_in_port1>;
    > + };
    > };
    > };
    > };
    > @@ -904,9 +898,11 @@
    > clocks = <&clk_375m>;
    > clock-names = "apb_pclk";
    > cpu = <&CPU10>;
    > - port {
    > - ptm10_out_port: endpoint {
    > - remote-endpoint = <&funnel2_in_port2>;
    > + out-ports {
    > + port {
    > + ptm10_out_port: endpoint {
    > + remote-endpoint = <&funnel2_in_port2>;
    > + };
    > };
    > };
    > };
    > @@ -918,9 +914,11 @@
    > clocks = <&clk_375m>;
    > clock-names = "apb_pclk";
    > cpu = <&CPU11>;
    > - port {
    > - ptm11_out_port: endpoint {
    > - remote-endpoint = <&funnel2_in_port3>;
    > + out-ports {
    > + port {
    > + ptm11_out_port: endpoint {
    > + remote-endpoint = <&funnel2_in_port3>;
    > + };
    > };
    > };
    > };
    > @@ -932,9 +930,11 @@
    > clocks = <&clk_375m>;
    > clock-names = "apb_pclk";
    > cpu = <&CPU12>;
    > - port {
    > - ptm12_out_port: endpoint {
    > - remote-endpoint = <&funnel3_in_port0>;
    > + out-ports {
    > + port {
    > + ptm12_out_port: endpoint {
    > + remote-endpoint = <&funnel3_in_port0>;
    > + };
    > };
    > };
    > };
    > @@ -946,9 +946,11 @@
    > clocks = <&clk_375m>;
    > clock-names = "apb_pclk";
    > cpu = <&CPU13>;
    > - port {
    > - ptm13_out_port: endpoint {
    > - remote-endpoint = <&funnel3_in_port1>;
    > + out-ports {
    > + port {
    > + ptm13_out_port: endpoint {
    > + remote-endpoint = <&funnel3_in_port1>;
    > + };
    > };
    > };
    > };
    > @@ -960,9 +962,11 @@
    > clocks = <&clk_375m>;
    > clock-names = "apb_pclk";
    > cpu = <&CPU14>;
    > - port {
    > - ptm14_out_port: endpoint {
    > - remote-endpoint = <&funnel3_in_port2>;
    > + out-ports {
    > + port {
    > + ptm14_out_port: endpoint {
    > + remote-endpoint = <&funnel3_in_port2>;
    > + };
    > };
    > };
    > };
    > @@ -974,9 +978,11 @@
    > clocks = <&clk_375m>;
    > clock-names = "apb_pclk";
    > cpu = <&CPU15>;
    > - port {
    > - ptm15_out_port: endpoint {
    > - remote-endpoint = <&funnel3_in_port3>;
    > + out-ports {
    > + port {
    > + ptm15_out_port: endpoint {
    > + remote-endpoint = <&funnel3_in_port3>;
    > + };
    > };
    > };
    > };
    >

    \
     
     \ /
      Last update: 2018-09-21 16:07    [W:2.126 / U:0.096 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site