lkml.org 
[lkml]   [2018]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v10 06/26] s390: vfio-ap: sysfs interfaces to configure adapters
On Wed, 12 Sep 2018 15:42:56 -0400
Tony Krowiak <akrowiak@linux.vnet.ibm.com> wrote:

> From: Tony Krowiak <akrowiak@linux.ibm.com>
>
> Introduces two new sysfs attributes for the VFIO mediated
> matrix device for assigning AP adapters to and unassigning
> AP adapters from a mediated matrix device. The IDs of the
> AP adapters assigned to the mediated matrix device will be
> stored in an AP mask (APM).
>
> The bits in the APM, from most significant to least significant
> bit, correspond to AP adapter IDs (APID) 0 to 255. On
> some systems, the maximum allowable adapter number may be less
> than 255 - depending upon the host's AP configuration - and
> assignment may be rejected if the input adapter ID exceeds the
> limit.
>
> When an adapter is assigned, the bit corresponding to the APID
> will be set in the APM. Likewise, when an adapter is
> unassigned, the bit corresponding to the APID will be cleared
> from the APM.
>
> In order to successfully assign an adapter, the APQNs derived from
> the adapter ID being assigned and the queue indexes of all domains
> previously assigned:
>
> 1. Must be bound to the vfio_ap device driver.
>
> 2. Must not be assigned to any other mediated matrix device
>
> If there are no domains assigned to the mdev, then there must
> be an AP queue bound to the vfio_ap device driver with an
> APQN containing the APID, otherwise all domains
> subsequently assigned will fail because there will be no
> AP queues bound with an APQN containing the adapter ID.
>
> Assigning or un-assigning an AP adapter will be rejected if
> a guest using the mediated matrix device is running.
>
> The relevant sysfs structures are:
>
> /sys/devices/vfio_ap/matrix/
> ...... [mdev_supported_types]
> ......... [vfio_ap-passthrough]
> ............ [devices]
> ...............[$uuid]
> .................. assign_adapter
> .................. unassign_adapter
>
> To assign an adapter to the $uuid mediated matrix device's APM,
> write the APID to the assign_adapter file. To unassign an adapter,
> write the APID to the unassign_adapter file. The APID is specified
> using conventional semantics: If it begins with 0x the number will
> be parsed as a hexadecimal number; if it begins with a 0 the number
> will be parsed as an octal number; otherwise, it will be parsed as a
> decimal number.
>
> For example, to assign adapter 173 (0xad) to the mediated matrix
> device $uuid:
>
> echo 173 > assign_adapter
>
> or
>
> echo 0xad > assign_adapter
>
> or
>
> echo 0255 > assign_adapter
>
> To unassign adapter 173 (0xad):
>
> echo 173 > unassign_adapter
>
> or
>
> echo 0xad > unassign_adapter
>
> or
>
> echo 0255 > unassign_adapter
>
> Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
> Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
> Tested-by: Michael Mueller <mimu@linux.ibm.com>
> Tested-by: Farhan Ali <alifm@linux.ibm.com>
> Tested-by: Pierre Morel <pmorel@linux.ibm.com>
> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
> ---
> drivers/s390/crypto/vfio_ap_ops.c | 295 +++++++++++++++++++++++++++++++++++++
> 1 files changed, 295 insertions(+), 0 deletions(-)

(...)

> +/**
> + * vfio_ap_mdev_verify_no_sharing
> + *
> + * Verifies that the APQNs derived from the cross product of the AP adapter IDs
> + * and AP queue indexes comprising the AP matrix are not configured for another
> + * mediated device. AP queue sharing is not allowed.
> + *
> + * @kvm: the KVM guest
> + * @matrix: the AP matrix
> + *
> + * Returns 0 if the APQNs are not shared, otherwise; returns -EADDRINUSE.
> + */
> +static int vfio_ap_mdev_verify_no_sharing(struct ap_matrix_mdev *matrix_mdev)
> +{
> + int nbits;
> + struct ap_matrix_mdev *lstdev;
> + unsigned long apm[BITS_TO_LONGS(matrix_mdev->matrix.apm_max + 1)];
> + unsigned long aqm[BITS_TO_LONGS(matrix_mdev->matrix.aqm_max + 1)];

Can you please convert this to use a fixed-size array? I think
{apm,aqm}_max has an upper bound of 255?

(Also, this can use DECLARE_BITMAP.)

> +
> + list_for_each_entry(lstdev, &matrix_dev->mdev_list, node) {
> + if (matrix_mdev == lstdev)
> + continue;
> +
> + memset(apm, 0, sizeof(apm));
> + memset(aqm, 0, sizeof(aqm));
> +
> + /*
> + * We work on full longs, as we can only exclude the leftover
> + * bits in non-inverse order. The leftover is all zeros.
> + */
> + nbits = sizeof(apm) * BITS_PER_BYTE;
> + if (!bitmap_and(apm, matrix_mdev->matrix.apm,
> + lstdev->matrix.apm, nbits))
> + continue;
> +
> + nbits = sizeof(aqm) * BITS_PER_BYTE;
> + if (!bitmap_and(aqm, matrix_mdev->matrix.aqm,
> + lstdev->matrix.aqm, nbits))
> + continue;
> +
> + return -EADDRINUSE;
> + }
> +
> + return 0;
> +}

\
 
 \ /
  Last update: 2018-09-21 11:40    [W:0.478 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site