lkml.org 
[lkml]   [2018]   [Sep]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH V12 00/14] Krait clocks + Krait CPUfreq
From


On 20 September 2018 14:01:57 BST, Sricharan R <sricharan@codeaurora.org> wrote:
>
>
>On 9/20/2018 1:54 AM, Craig wrote:
>> Yup, this patch seems to have fixed the higher frequencies from the
>quick test I did.
>>
> Thanks !!. Can i take that as Craig Tatlor <ctatlor97@gmail.com> ?
Sure, no problem
>
>Regards,
> Sricharan
>
> tested-by:
>> On 7 September 2018 15:28:53 BST, Craig Tatlor <ctatlor97@gmail.com>
>wrote:
>>>
>>>
>>> On 7 September 2018 10:57:34 BST, Sricharan R
>>> <sricharan@codeaurora.org> wrote:
>>>> Hi Craig,
>>>>
>>>>
>>>>>> [v12]
>>>>>> * Added my signed-off that was missing in some patches.
>>>>>> * Added Bjorn's acked that i missed earlier.
>>>>>>
>>>>>
>>>>> Can you give this a try on your 8974 device and check if the
>>>>> pvs version reporting, scaling for higher frequencies are fine ?
>>>>> Sorry, i could not get hold of a 8974 device. So in-case if you
>>>> still
>>>>> have the issues with higher frequencies, can you give a quick
>>> debug
>>>>> and report. That would be of great help.
>>>>>
>>>> Ping on this ..
>>>
>>> Hi, didn't see your last message,
>>>
>>> Will have a try on mine in the weekend and report back.
>>>>
>>>> Regards,
>>>> Sricharan
>>>>
>>>>> Regards,
>>>>> Sricharan
>>>>>
>>>>>
>>>>>> [v11]
>>>>>> * Dropped patch 13 and 14 from v10 and
>>>>>> merged the qcom-cpufreq-krait driver to the existing
>>>> qcom-cpufreq-kryo.c
>>>>>> * Rebased on top of clk-next
>>>>>> * Fixed a bug while populating the pvs version for krait.
>>>>>>
>>>>>> [v10]
>>>>>> * Addressed Stephen's comments to add clocks bindings
>properties
>>>>>> to the newly introduced nodes.
>>>>>> * Added a change to include opp-supported-hw to qcom-cpufreq.c
>>>>>> * Rebased on top of clk-next
>>>>>> * Although there were minor changes to bindings and the driver
>>>>>> retained the acked-by tags from Rob and Viresh respectively.
>
>>>
>>>>>>
>>>>>> [v9]
>>>>>> * Fixed a rebase issue in Makefile and added Tag from Robh.
>>>>>>
>>>>>> [v8]
>>>>>> * Fixed a bug in path#14 pointed out by Viresh and also added
>>>> tags.
>>>>>> No change in any other patch.
>>>>>>
>>>>>> [v7]
>>>>>> * Fixed comments from Viresh for cleaning up the error handling
>>>>>> in qcom-cpufreq.c. Also changed the init function to lateinit
>>>>>> call. This is required because nvmem which gets initialised
>>> with
>>>>>> module_init needs to go first.
>>>>>> * Fixed Rob's comments for bindings documentation
>>>>>> * Fixed kbuild build issue in clk-lpc32xx.c
>>>>>> * Rebased on top of clk-next
>>>>>>
>>>>>> [v6]
>>>>>> * Adrressed comments from Viresh for patch #14 in v5 [5]
>>>>>> * Introduced a new binding operating-points-v2-krait-cpu
>>>>>> as per discussion with Rob
>>>>>> * Added Review tags
>>>>>>
>>>>>> [v5]
>>>>>> * Addressed comments from Rob for bindings
>>>>>> * Addressed comments from Viresh to use
>dev_pm_opp_set_prop_name,
>>>> accordingly
>>>>>> dropped patch #12 and corrected patch #11 from previous patch
>>>> set in [4]
>>>>>> * Converted to use #spdx tags for newly introduced files
>>>>>>
>>>>>> Mostly a resend of the v3 posted by Stephen quite some time back
>>> [1]
>>>>>> except for few changes.
>>>>>> Based on reading some feedback from list,
>>>>>> * Dropped the patch "clk: Add safe switch hook" from v3 [2].
>>>>>> Now this is taken care by patch#10 in this series only for
>>>> Krait.
>>>>>> * Dropped the path "clk: Avoid sending high rates to downstream
>>>>>> clocks during set_rate" from v3 [3].
>>>>>> * Rebased on top of clk-next.
>>>>>> * Dropped the DT update from the series. Will send separately
>>>>>> * Now with cpufreq-dt+opp supporting voltage scaling,
>registering
>>>> the
>>>>>> krait cpu supplies in DT should be sufficient. But one issue
>>> is,
>>>>>> the qcom-cpufreq drivers reads the efuse and based on that
>>>> registers
>>>>>> the opp data and then registers the cpufreq-dt device. So
>when
>>>>>> cpufreq-dt driver probes and registers the regulator to the
>OPP
>>>> framework,
>>>>>> it expects that the opp data for the device should not be
>>>> registered before
>>>>>> the regulator. Will send a RFC patch removing that check, to
>>>> find out the
>>>>>> right way of doing it.
>>>>>>
>>>>>> These patches provide cpufreq scaling on devices with Krait CPUs.
>>>>>> In Krait CPU designs there's one PLL and two muxes per CPU,
>>> allowing
>>>>>> us to switch CPU frequencies independently.
>>>>>>
>>>>>> secondary
>>>>>> +-----+ +
>>>>>> | QSB |-------+------------|\
>>>>>> +-----+ | | |-+
>>>>>> | +-------|/ |
>>>>>> | | + |
>>>>>> +-----+ | | |
>>>>>> | PLL |----+-------+ | primary
>>>>>> +-----+ | | | +
>>>>>> | | +-----|\ +------+
>>>>>> +-------+ | | | \ | |
>>>>>> | HFPLL |----------+-----------------| |-----| CPU0 |
>>>>>> +-------+ | | | | | | |
>>>>>> | | | +-----+ | / +------+
>>>>>> | | +-| / 2 |---------|/
>>>>>> | | +-----+ +
>>>>>> | | secondary
>>>>>> | | +
>>>>>> | +------------|\
>>>>>> | | |-+
>>>>>> +---------------|/ | primary
>>>>>> + | +
>>>>>> +-----|\ +------+
>>>>>> +-------+ | \ | |
>>>>>> | HFPLL |----------------------------| |-----| CPU1 |
>>>>>> +-------+ | | | | |
>>>>>> | +-----+ | / +------+
>>>>>> +-| / 2 |---------|/
>>>>>> +-----+ +
>>>>>>
>>>>>> To support this in the common clock framework we model the muxes,
>>>>>> dividers, and PLLs as different clocks. CPUfreq only interacts
>>>>>> with the primary mux (farthest right in the diagram). When
>CPUfreq
>>>>>> sets a rate, the mux code finds the best parent that can provide
>>> the
>>>> rate.
>>>>>> Due to the design, QSB and the top PLL are always a fixed rate
>and
>>>> thus
>>>>>> only support one frequency each. These sources provide the lowest
>>>>>> frequencies for the CPUs. The HFPLLs are where we can make the
>CPU
>>>> go
>>>>>> faster (GHz range). Sometimes we need to run the HFPLL twice as
>>>>>> fast and divide it by two to get a particular frequency.
>>>>>>
>>>>>> When switching rates we can't leave the CPU clocked by the HFPLL
>>>> because
>>>>>> we need to turn off the output of the PLL when changing its
>>>> frequency.
>>>>>> This means we have to switch over to the secondary mux and use
>one
>>>> of the
>>>>>> fixed sources. This is why we need something like the safe parent
>>>> patch.
>>>>>>
>>>>>> [1]
>>>>
>http://lists.infradead.org/pipermail/linux-arm-kernel/2015-March/332607.html
>>>>>> [2]
>>>>
>http://lists.infradead.org/pipermail/linux-arm-kernel/2015-March/332615.html
>>>>>> [3]
>>>>
>http://lists.infradead.org/pipermail/linux-arm-kernel/2015-March/332608.html
>>>>>> [4] https://lwn.net/Articles/740994/
>>>>>> [5] https://lkml.org/lkml/2017/12/19/537
>>>>>>
>>>>>>
>>>>>> Sricharan R (3):
>>>>>> clk: qcom: Add safe switch hook for krait mux clocks
>>>>>> cpufreq: qcom: Re-organise kryo cpufreq to use it for other
>nvmem
>>>>>> based qcom socs
>>>>>> cpufreq: qcom: Add support for krait based socs
>>>>>>
>>>>>> Stephen Boyd (11):
>>>>>> ARM: Add Krait L2 register accessor functions
>>>>>> clk: qcom: Add support for High-Frequency PLLs (HFPLLs)
>>>>>> clk: qcom: Add HFPLL driver
>>>>>> dt-bindings: clock: Document qcom,hfpll
>>>>>> clk: qcom: Add MSM8960/APQ8064's HFPLLs
>>>>>> clk: qcom: Add IPQ806X's HFPLLs
>>>>>> clk: qcom: Add support for Krait clocks
>>>>>> clk: qcom: Add KPSS ACC/GCC driver
>>>>>> dt-bindings: arm: Document qcom,kpss-gcc
>>>>>> clk: qcom: Add Krait clock controller driver
>>>>>> dt-bindings: clock: Document qcom,krait-cc
>>>>>>
>>>>>> .../devicetree/bindings/arm/msm/qcom,kpss-acc.txt | 19 +
>>>>>> .../devicetree/bindings/arm/msm/qcom,kpss-gcc.txt | 44 +++
>>>>>> .../devicetree/bindings/clock/qcom,hfpll.txt | 60 ++++
>>>>>> .../devicetree/bindings/clock/qcom,krait-cc.txt | 34 ++
>>>>>> .../{kryo-cpufreq.txt => qcom-nvmem-cpufreq.txt} | 7 +-
>>>>>> arch/arm/common/Kconfig | 3 +
>>>>>> arch/arm/common/Makefile | 1 +
>>>>>> arch/arm/common/krait-l2-accessors.c | 48 +++
>>>>>> arch/arm/include/asm/krait-l2-accessors.h | 9 +
>>>>>> drivers/clk/qcom/Kconfig | 28 ++
>>>>>> drivers/clk/qcom/Makefile | 5 +
>>>>>> drivers/clk/qcom/clk-hfpll.c | 244
>>>> +++++++++++++
>>>>>> drivers/clk/qcom/clk-hfpll.h | 44 +++
>>>>>> drivers/clk/qcom/clk-krait.c | 126 +++++++
>>>>>> drivers/clk/qcom/clk-krait.h | 40 +++
>>>>>> drivers/clk/qcom/gcc-ipq806x.c | 82 +++++
>>>>>> drivers/clk/qcom/gcc-msm8960.c | 172
>+++++++++
>>>>>> drivers/clk/qcom/hfpll.c | 96 +++++
>>>>>> drivers/clk/qcom/kpss-xcc.c | 87 +++++
>>>>>> drivers/clk/qcom/krait-cc.c | 397
>>>> +++++++++++++++++++++
>>>>>> drivers/cpufreq/Kconfig.arm | 6 +-
>>>>>> drivers/cpufreq/Makefile | 2 +-
>>>>>> drivers/cpufreq/cpufreq-dt-platdev.c | 5 +
>>>>>> drivers/cpufreq/qcom-cpufreq-kryo.c | 232
>>>> ------------
>>>>>> drivers/cpufreq/qcom-cpufreq-nvmem.c | 387
>>>> ++++++++++++++++++++
>>>>>> include/dt-bindings/clock/qcom,gcc-msm8960.h | 2 +
>>>>>> 26 files changed, 1941 insertions(+), 239 deletions(-)
>>>>>> create mode 100644
>>>> Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt
>>>>>> create mode 100644
>>>> Documentation/devicetree/bindings/clock/qcom,hfpll.txt
>>>>>> create mode 100644
>>>> Documentation/devicetree/bindings/clock/qcom,krait-cc.txt
>>>>>> rename Documentation/devicetree/bindings/opp/{kryo-cpufreq.txt
>=>
>>>> qcom-nvmem-cpufreq.txt} (98%)
>>>>>> create mode 100644 arch/arm/common/krait-l2-accessors.c
>>>>>> create mode 100644 arch/arm/include/asm/krait-l2-accessors.h
>>>>>> create mode 100644 drivers/clk/qcom/clk-hfpll.c
>>>>>> create mode 100644 drivers/clk/qcom/clk-hfpll.h
>>>>>> create mode 100644 drivers/clk/qcom/clk-krait.c
>>>>>> create mode 100644 drivers/clk/qcom/clk-krait.h
>>>>>> create mode 100644 drivers/clk/qcom/hfpll.c
>>>>>> create mode 100644 drivers/clk/qcom/kpss-xcc.c
>>>>>> create mode 100644 drivers/clk/qcom/krait-cc.c
>>>>>> delete mode 100644 drivers/cpufreq/qcom-cpufreq-kryo.c
>>>>>> create mode 100644 drivers/cpufreq/qcom-cpufreq-nvmem.c
>>>>>>
>>>>>
>>

--
Please, Don't Panic

\
 
 \ /
  Last update: 2018-09-20 16:30    [W:0.339 / U:0.940 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site