lkml.org 
[lkml]   [2018]   [Sep]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/2] add Ethernet driver support for mt2712
From
Date
Hi Jose, Andrew,
Thanks for your comments.
Synopsys ip version in mt2712 is 4.21a, and followed ic will use 5.10a.
it seems GMAC4+ is a good choice. I'll try to extend STMMAC to support
mt2712.
Any tips about extend STMMAC? or anythings I should pay attention to?

On Mon, 2018-09-17 at 17:18 +0100, Jose Abreu wrote:
> Hi Andrew, Biao,
>
> On 17-09-2018 16:24, Andrew Lunn wrote:
> > On Mon, Sep 17, 2018 at 02:29:21PM +0800, Biao Huang wrote:
> >
> > Adding in the STMMAC driver maintainers.
> >
> >> Ethernet in mt2712 is totally different from that in
> >> drivers/net/ethernet/mediatek/*, so we add new folder for mt2712 SoC.
> >>
> >> The mt2712 Ethernet IP is from Synopsys, and we notice that there is a
> >> reference driver in drivers/net/ethernet/synopsys/*. But
> >> 1. our version is only for 10/100/1000Mbps, not for 2.5/4/5Gbps.
> >> mt2712 Ethernet design is differnet from that in synopsys folder in many
> >> aspects, and some key features are not included in mt2712, such as rss
> >> and split header. At the same time, some features we need have not been
> >> implenmented in synopsys folder.
> > In general, we don't have two very similar drivers. We try to have one
> > driver. If the problem was just missing features in the stmmac driver,
> > you can add them. I doubt not supporting 2.5/4/5Gbps in your silicon
> > is an issue, since very few STMMAC devices have this. By split header,
> > do you mean support for TSO? That seems to be a gmac4 or newer
> > feature, but the driver supports not having tso support in hardware.
> >
> > Giuseppe, Alexandre, Jose: Please can you look at the proposed driver
> > and see how much it really differs from the STMMAC driver.
>
> Thanks for the cc Andrew, indeed this looks very similar and the
> register bank matches, by what I've seen, GMAC 4+.
>
> > How easy
> > would it be to extend stmmac it to support the mt2712?
>
> Very easy, as I've just done with XGMAC2. If Biao wants to expand
> stmmac functionality I'm all in favor!
>
> Thanks and Best Regards,
> Jose Miguel Abreu
>
> >
> > Thanks
> > Andrew
>
Best Regards!
Biao

\
 
 \ /
  Last update: 2018-09-18 05:26    [W:0.147 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site