lkml.org 
[lkml]   [2018]   [Sep]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 12/15] ALSA: hda/ca0132 - Add output set commands for AE-5
Date
This patch adds output selection commands for the AE-5.

Signed-off-by: Connor McAdams <conmanx360@gmail.com>
---
sound/pci/hda/patch_ca0132.c | 79 ++++++++++++++++++++++++++++++++++++++------
1 file changed, 69 insertions(+), 10 deletions(-)

diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c
index 4de94d7..364c3fe 100644
--- a/sound/pci/hda/patch_ca0132.c
+++ b/sound/pci/hda/patch_ca0132.c
@@ -666,6 +666,29 @@ static const struct ct_dsp_volume_ctl ca0132_alt_vol_ctls[] = {
}
};

+/* Values for ca0113_mmio_command_set for selecting output. */
+#define AE5_CA0113_OUT_SET_COMMANDS 6
+struct ae5_ca0113_output_set {
+ unsigned int group[AE5_CA0113_OUT_SET_COMMANDS];
+ unsigned int target[AE5_CA0113_OUT_SET_COMMANDS];
+ unsigned int vals[AE5_CA0113_OUT_SET_COMMANDS];
+};
+
+static const struct ae5_ca0113_output_set ae5_ca0113_output_presets[] = {
+ { .group = { 0x30, 0x30, 0x48, 0x48, 0x48, 0x30 },
+ .target = { 0x2e, 0x30, 0x0d, 0x17, 0x19, 0x32 },
+ .vals = { 0x00, 0x00, 0x40, 0x00, 0x00, 0x3f }
+ },
+ { .group = { 0x30, 0x30, 0x48, 0x48, 0x48, 0x30 },
+ .target = { 0x2e, 0x30, 0x0d, 0x17, 0x19, 0x32 },
+ .vals = { 0x3f, 0x3f, 0x00, 0x00, 0x00, 0x00 }
+ },
+ { .group = { 0x30, 0x30, 0x48, 0x48, 0x48, 0x30 },
+ .target = { 0x2e, 0x30, 0x0d, 0x17, 0x19, 0x32 },
+ .vals = { 0x00, 0x00, 0x40, 0x00, 0x00, 0x3f }
+ }
+};
+
enum hda_cmd_vendor_io {
/* for DspIO node */
VENDOR_DSPIO_SCP_WRITE_DATA_LOW = 0x000,
@@ -4025,6 +4048,18 @@ static int ca0132_select_out(struct hda_codec *codec)
return err < 0 ? err : 0;
}

+static void ae5_mmio_select_out(struct hda_codec *codec)
+{
+ struct ca0132_spec *spec = codec->spec;
+ unsigned int i;
+
+ for (i = 0; i < AE5_CA0113_OUT_SET_COMMANDS; i++)
+ ca0113_mmio_command_set(codec,
+ ae5_ca0113_output_presets[spec->cur_out_type].group[i],
+ ae5_ca0113_output_presets[spec->cur_out_type].target[i],
+ ae5_ca0113_output_presets[spec->cur_out_type].vals[i]);
+}
+
/*
* These are the commands needed to setup output on each of the different card
* types.
@@ -4041,16 +4076,24 @@ static void ca0132_alt_select_out_quirk_handler(struct hda_codec *codec)
ca0113_mmio_gpio_set(codec, 7, false);
ca0113_mmio_gpio_set(codec, 4, true);
ca0113_mmio_gpio_set(codec, 1, true);
- chipio_set_control_param(codec, 0x0D, 0x18);
+ chipio_set_control_param(codec, 0x0d, 0x18);
break;
case QUIRK_R3DI:
- chipio_set_control_param(codec, 0x0D, 0x24);
+ chipio_set_control_param(codec, 0x0d, 0x24);
r3di_gpio_out_set(codec, R3DI_LINE_OUT);
break;
case QUIRK_R3D:
- chipio_set_control_param(codec, 0x0D, 0x24);
+ chipio_set_control_param(codec, 0x0d, 0x24);
ca0113_mmio_gpio_set(codec, 1, true);
break;
+ case QUIRK_AE5:
+ ae5_mmio_select_out(codec);
+ tmp = FLOAT_ZERO;
+ dspio_set_uint_param(codec, 0x96, 0x29, tmp);
+ dspio_set_uint_param(codec, 0x96, 0x2a, tmp);
+ chipio_set_control_param(codec, 0x0d, 0xa4);
+ chipio_write(codec, 0x18b03c, 0x00000012);
+ break;
}
break;
case HEADPHONE_OUT:
@@ -4059,16 +4102,24 @@ static void ca0132_alt_select_out_quirk_handler(struct hda_codec *codec)
ca0113_mmio_gpio_set(codec, 7, true);
ca0113_mmio_gpio_set(codec, 4, true);
ca0113_mmio_gpio_set(codec, 1, false);
- chipio_set_control_param(codec, 0x0D, 0x12);
+ chipio_set_control_param(codec, 0x0d, 0x12);
break;
case QUIRK_R3DI:
- chipio_set_control_param(codec, 0x0D, 0x21);
+ chipio_set_control_param(codec, 0x0d, 0x21);
r3di_gpio_out_set(codec, R3DI_HEADPHONE_OUT);
break;
case QUIRK_R3D:
- chipio_set_control_param(codec, 0x0D, 0x21);
+ chipio_set_control_param(codec, 0x0d, 0x21);
ca0113_mmio_gpio_set(codec, 0x1, false);
break;
+ case QUIRK_AE5:
+ ae5_mmio_select_out(codec);
+ tmp = FLOAT_ONE;
+ dspio_set_uint_param(codec, 0x96, 0x29, tmp);
+ dspio_set_uint_param(codec, 0x96, 0x2a, tmp);
+ chipio_set_control_param(codec, 0x0d, 0xa1);
+ chipio_write(codec, 0x18b03c, 0x00000012);
+ break;
}
break;
case SURROUND_OUT:
@@ -4077,15 +4128,23 @@ static void ca0132_alt_select_out_quirk_handler(struct hda_codec *codec)
ca0113_mmio_gpio_set(codec, 7, false);
ca0113_mmio_gpio_set(codec, 4, true);
ca0113_mmio_gpio_set(codec, 1, true);
- chipio_set_control_param(codec, 0x0D, 0x18);
+ chipio_set_control_param(codec, 0x0d, 0x18);
break;
case QUIRK_R3DI:
- chipio_set_control_param(codec, 0x0D, 0x24);
+ chipio_set_control_param(codec, 0x0d, 0x24);
r3di_gpio_out_set(codec, R3DI_LINE_OUT);
break;
case QUIRK_R3D:
ca0113_mmio_gpio_set(codec, 1, true);
- chipio_set_control_param(codec, 0x0D, 0x24);
+ chipio_set_control_param(codec, 0x0d, 0x24);
+ break;
+ case QUIRK_AE5:
+ ae5_mmio_select_out(codec);
+ tmp = FLOAT_ZERO;
+ dspio_set_uint_param(codec, 0x96, 0x29, tmp);
+ dspio_set_uint_param(codec, 0x96, 0x2a, tmp);
+ chipio_set_control_param(codec, 0x0d, 0xa4);
+ chipio_write(codec, 0x18b03c, 0x00000012);
break;
}
break;
@@ -4231,7 +4290,7 @@ static int ca0132_alt_select_out(struct hda_codec *codec)
break;
}

- /* run through the output dsp commands for line-out */
+ /* run through the output dsp commands for the selected output. */
for (i = 0; i < alt_out_presets[spec->cur_out_type].commands; i++) {
err = dspio_set_uint_param(codec,
alt_out_presets[spec->cur_out_type].mids[i],
--
2.7.4
\
 
 \ /
  Last update: 2018-09-18 20:36    [W:0.093 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site