Messages in this thread Patch in this message | | | From | Lubomir Rintel <> | Subject | [PATCH v2 1/5] dt-bindings: spi/spi-pxa2xx: add PXA2xx SSP SPI Controller | Date | Mon, 17 Sep 2018 13:35:55 +0200 |
| |
This is the SPI controller found on Marvel MMP2 and perhaps more platforms.
Changes since v1: - s/ssp@d4035000/spi@d4035000/
Cc: Mark Brown <broonie@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> --- .../devicetree/bindings/spi/spi-pxa2xx.txt | 24 +++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 Documentation/devicetree/bindings/spi/spi-pxa2xx.txt
diff --git a/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt b/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt new file mode 100644 index 000000000000..0335a9bd2e8a --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt @@ -0,0 +1,24 @@ +PXA2xx SSP SPI Controller + +Required properties: +- compatible: Must be "marvell,mmp2-ssp". +- reg: Offset and length of the device's register set. +- interrupts: Should be the interrupt number. +- clocks: Should contain a single entry describing the clock input. +- #address-cells: Number of cells required to define a chip select address. +- #size-cells: Should be zero. + +Optional properties: +- cs-gpios: list of GPIO chip selects. See the SPI bus bindings, + Documentation/devicetree/bindings/spi/spi-bus.txt + +Child nodes represent devices on the SPI bus + See ../spi/spi-bus.txt + +Example: + ssp1: spi@d4035000 { + compatible = "marvell,mmp2-ssp"; + reg = <0xd4035000 0x1000>; + clocks = <&soc_clocks MMP2_CLK_SSP0>; + interrupts = <0>; + }; -- 2.17.1
| |