lkml.org 
[lkml]   [2018]   [Sep]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2] arm64: dts: rockchip: add i2s and spdif endpoints of rk3328
Date
Hi,

Am Montag, 17. September 2018, 10:55:55 CEST schrieb Katsuhiro Suzuki:
> This patch adds port and endpoint of i2s and spdif nodes for rk3328.
> Because to use modern sound card interface such as audio-graph-card.
>
> Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
> ---
> arch/arm64/boot/dts/rockchip/rk3328.dtsi | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> index d3ef6566325e..fd35dbd37ee2 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> @@ -179,7 +179,13 @@
> clock-names = "i2s_clk", "i2s_hclk";
> dmas = <&dmac 11>, <&dmac 12>;
> dma-names = "tx", "rx";
> + #sound-dai-cells = <0>;
> status = "disabled";
> +
> + i2s0_p0: port {
> + i2s0_p0_0: endpoint {
> + };
> + };

I'm still pondering this. I.e. I'm not sure I really like adding all these
empty nodes only to have them filled in board devicetrees.

This is specific to the audio-graph-card, and neither simple-audio-card
nor the Rockchip-specific cards we have use something like this, so
currently I'm tending to just have all audio-graph-nodes defined in the
board devicetree using it.

For example similar to arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
or zte/zx296718-pcbox.dts do it.

It would be different if the graph-links were actually on the soc-level
like vop<->hdmi or so, but this is completely board-specific.

Same for the others below.

Thoughts?
Heiko


> };
>
> i2s1: i2s@ff010000 {
> @@ -190,7 +196,13 @@
> clock-names = "i2s_clk", "i2s_hclk";
> dmas = <&dmac 14>, <&dmac 15>;
> dma-names = "tx", "rx";
> + #sound-dai-cells = <0>;
> status = "disabled";
> +
> + i2s1_p0: port {
> + i2s1_p0_0: endpoint {
> + };
> + };
> };
>
> i2s2: i2s@ff020000 {
> @@ -201,7 +213,13 @@
> clock-names = "i2s_clk", "i2s_hclk";
> dmas = <&dmac 0>, <&dmac 1>;
> dma-names = "tx", "rx";
> + #sound-dai-cells = <0>;
> status = "disabled";
> +
> + i2s2_p0: port {
> + i2s2_p0_0: endpoint {
> + };
> + };
> };
>
> spdif: spdif@ff030000 {
> @@ -214,7 +232,13 @@
> dma-names = "tx";
> pinctrl-names = "default";
> pinctrl-0 = <&spdifm2_tx>;
> + #sound-dai-cells = <0>;
> status = "disabled";
> +
> + spdif_p0: port {
> + spdif_p0_0: endpoint {
> + };
> + };
> };
>
> pdm: pdm@ff040000 {
>




\
 
 \ /
  Last update: 2018-09-17 12:48    [W:0.120 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site