lkml.org 
[lkml]   [2018]   [Sep]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 2/4] iio: Documentation: Add Xilinx AMS sysfs documentation
From
Date
On 17.9.2018 12:06, Jonathan Cameron wrote:
> On Mon, 17 Sep 2018 11:56:08 +0200
> Michal Simek <michal.simek@xilinx.com> wrote:
>
>> On 16.9.2018 12:12, Jonathan Cameron wrote:
>>> On Fri, 14 Sep 2018 12:48:28 +0530
>>> Manish Narani <manish.narani@xilinx.com> wrote:
>>>
>>>> Add documentation for xilinx-ams driver. This contains information about
>>>> various voltages and temperatures on PS (Processing System), PL
>>>> (Programmable Logic) and AMS Control Block.
>>>>
>>>> Signed-off-by: Manish Narani <manish.narani@xilinx.com>
>>> The more I look at this device the more I'm convinced it is very much a dedicated
>>> hardware monitoring function, not a generic ADC sensing unit at all.
>>>
>>> Hmm. It is still fine to have it in IIO but you need to think in detail
>>> about how you are going to interface this to hwmon via the iio-hwmon bridge.
>>>
>>> Some of the interface complexity should only really be apparent when we hit
>>> hwmon perhaps rather than having so many different custom interfaces in IIO.
>>>
>>> Please also loop in the maintainers and lists for hwmon in the next
>>> version so we can get their input.
>>
>> Isn't there iio-hwmon driver for this?
>>
>> Thanks,
>> Michal
>
> Absolutely. The interesting bit is that if we are planning to actually expose
> the many monitoring channels via iio-hwmon IIRC it won't use the extended names
> at all (I may have missremembered this thogh). As such we may want to reduced
> the amount of custom ABI in IIO in favour of a level of opaqueness with the
> 'real' interface provided by the iio-hwmon bridge driver. A quick glance
> suggested we may need to increase the information exposed by the iio-hwmon
> driver to make this work.

ok.


> When we have run into cases like this (a very much hardware monitoring oriented
> device with a few general purpose channels) in the past we have always gotten
> agreement from the hwmon maintainers that they are happy with using an IIO provider
> and the iio-hwmon driver route. It is just nice to keep everyone in agreement
> and have no surprises!

Definitely I agree with this.

Thanks,
Michal


\
 
 \ /
  Last update: 2018-09-17 12:27    [W:0.199 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site