lkml.org 
[lkml]   [2018]   [Sep]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
SubjectRe: [PATCH] pinctrl: icelake: Fix the resource number for community-4/5
On Fri, Sep 14, 2018 at 2:06 PM Rajat Jain <rajatja@google.com> wrote:
>
> On Fri, Sep 14, 2018 at 12:41 AM Andy Shevchenko
> <andy.shevchenko@gmail.com> wrote:
> >
> > On Fri, Sep 14, 2018 at 1:54 AM Rajat Jain <rajatja@google.com> wrote:
> > >
> > > The Icelake does not have a community-3, and the memory resources are
> > > laid out in the following order in the ACPI:
> > >
> > > resource-0: community-0 registers
> > > resource-1: community-1 registers
> > > resource-2: community-2 registers
> > > resource-3: community-4 registers
> > > resource-4: community-5 registers
> > >
> > > (EDS also describes the communities in the above order).
> > >
> > > Since the pinctrl driver exposes communities 0, 1, 4, 5, it needs to get
> > > the corresponding community registers by getting the resourse number right.
> > > Currently the resourse number is not correct for community 4 and 5, thus
> > > fix that.
> > >
> >
> > Can you share link to the ACPI dump of the tables? (you may get one by
> > running `acpidump -o tables.dat`)
>
> I don't have that command on my system, but I took
> /sys/firmware/acpi/tables/DSDT from the system and disassembled it
> using Intel disassembler (iasl -d) and here is the relevant portion
> that describes the GPIO controller. The port IDs for communities can
> be seen in the below output (i.e. the PCRB()):

I realized PCRB() is an ACPI method defined in the same disasembly:

Method (PCRB, 1, NotSerialized)
{
Return ((0xFD000000 + (Arg0 << 0x10)))
}

>
> Device (GPIO)
> {
> Name (_HID, "INT3455") // _HID: Hardware ID
> Name (_UID, Zero) // _UID: Unique ID
> Name (_DDN, "GPIO Controller") // _DDN: DOS Device Name
> Name (RBUF, ResourceTemplate ()
> {
> Memory32Fixed (ReadWrite,
> 0x00000000, // Address Base
> 0x00000000, // Address Length
> _Y06)
> Memory32Fixed (ReadWrite,
> 0x00000000, // Address Base
> 0x00000000, // Address Length
> _Y07)
> Memory32Fixed (ReadWrite,
> 0x00000000, // Address Base
> 0x00000000, // Address Length
> _Y08)
> Memory32Fixed (ReadWrite,
> 0x00000000, // Address Base
> 0x00000000, // Address Length
> _Y09)
> Memory32Fixed (ReadWrite,
> 0x00000000, // Address Base
> 0x00000000, // Address Length
> _Y0A)
> Interrupt (ResourceConsumer, Level, ActiveLow, Shared, ,, )
> {
> 0x0000000E,
> }
> })
> Method (_CRS, 0, NotSerialized) // _CRS: Current
> Resource Settings
> {
> CreateDWordField (RBUF, \_SB.PCI0.GPIO._Y06._BAS,
> BAS0) // _BAS: Base Address
> CreateDWordField (RBUF, \_SB.PCI0.GPIO._Y06._LEN,
> LEN0) // _LEN: Length
> BAS0 = PCRB (0x6E)
> LEN0 = 0x00010000
> CreateDWordField (RBUF, \_SB.PCI0.GPIO._Y07._BAS,
> BAS1) // _BAS: Base Address
> CreateDWordField (RBUF, \_SB.PCI0.GPIO._Y07._LEN,
> LEN1) // _LEN: Length
> BAS1 = PCRB (0x6D)
> LEN1 = 0x00010000
> CreateDWordField (RBUF, \_SB.PCI0.GPIO._Y08._BAS,
> BAS2) // _BAS: Base Address
> CreateDWordField (RBUF, \_SB.PCI0.GPIO._Y08._LEN,
> LEN2) // _LEN: Length
> BAS2 = PCRB (0x6C)
> LEN2 = 0x00010000
> CreateDWordField (RBUF, \_SB.PCI0.GPIO._Y09._BAS,
> BAS4) // _BAS: Base Address
> CreateDWordField (RBUF, \_SB.PCI0.GPIO._Y09._LEN,
> LEN4) // _LEN: Length
> BAS4 = PCRB (0x6A)
> LEN4 = 0x00010000
> CreateDWordField (RBUF, \_SB.PCI0.GPIO._Y0A._BAS,
> BAS5) // _BAS: Base Address
> CreateDWordField (RBUF, \_SB.PCI0.GPIO._Y0A._LEN,
> LEN5) // _LEN: Length
> BAS5 = PCRB (0x69)
> LEN5 = 0x00010000
> Return (RBUF) /* \_SB_.PCI0.GPIO.RBUF */
> }
>
> Method (_STA, 0, NotSerialized) // _STA: Status
> {
> Return (0x0F)
> }
> }
>
> Please let me know if this helps, or if you need more info.
>
> Thanks & Best Regards,
>
> Rajat
>
> >
> > > Signed-off-by: Rajat Jain <rajatja@google.com>
> > > ---
> > > drivers/pinctrl/intel/pinctrl-icelake.c | 4 ++--
> > > 1 file changed, 2 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/pinctrl/intel/pinctrl-icelake.c b/drivers/pinctrl/intel/pinctrl-icelake.c
> > > index 630b966ce081..5b4eaf7c90df 100644
> > > --- a/drivers/pinctrl/intel/pinctrl-icelake.c
> > > +++ b/drivers/pinctrl/intel/pinctrl-icelake.c
> > > @@ -331,8 +331,8 @@ static const struct intel_padgroup icllp_community5_gpps[] = {
> > > static const struct intel_community icllp_communities[] = {
> > > ICL_COMMUNITY(0, 0, 58, icllp_community0_gpps),
> > > ICL_COMMUNITY(1, 59, 152, icllp_community1_gpps),
> > > - ICL_COMMUNITY(2, 153, 215, icllp_community4_gpps),
> > > - ICL_COMMUNITY(3, 216, 240, icllp_community5_gpps),
> > > + ICL_COMMUNITY(3, 153, 215, icllp_community4_gpps),
> > > + ICL_COMMUNITY(4, 216, 240, icllp_community5_gpps),
> > > };
> > >
> > > static const unsigned int icllp_spi0_pins[] = { 22, 23, 24, 25, 26 };
> > > --
> > > 2.19.0.397.gdd90340f6a-goog
> > >
> >
> >
> > --
> > With Best Regards,
> > Andy Shevchenko

\
 
 \ /
  Last update: 2018-09-14 23:40    [W:0.068 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site