lkml.org 
[lkml]   [2018]   [Sep]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] iio: proximity: Add driver support for ST's VL53L0X ToF ranging sensor.
Hi Song,

On Thu, Sep 13, 2018 at 10:22:29AM +0800, Song Qiang wrote:
> This driver was originally written by ST in 2016 as a misc input device
> driver, and hasn't been maintained for a long time. I grabbed some code
> from it's API and reformed it into a iio proximity device driver.
> This version of driver uses i2c bus to talk to the sensor and
> polling for measuring completes, so no irq line is needed.
> This version of driver supports only one-shot mode, and it can be
> tested with reading from
> /sys/bus/iio/devices/iio:deviceX/in_distance_raw
>
> Signed-off-by: Song Qiang <songqiang.1304521@gmail.com>

I'm sorry but you probably need another revision.

And don't feel embarrassed, I mean this is your first patch
in the kernel and that's an IIO driver!!

I used to fix spelling mistakes, align parameters, ... an year ago
and even those got rejected several times ;)

> ---

> +ST VL53L0X ToF RANGER(I2C) IIO DRIVER
> +M: Song Qiang <songqiang.1304521@gmail.com>
> +L: linux-iio@vger.kernel.org
> +S: Maintained
> +F: drivers/iio/proximity/vl53l0x-i2c.c
> +F: Documentation/devicetree/bindings/iio/proximity/vl53l0x.txt

Obligations!

Just don't go "Keyser Söze" once you're done with your major
at University. You would need to test/review patches in future.

Not a big deal though..

> +
> +static const struct of_device_id st_vl53l0x_dt_match[] = {
> + { .compatible = "st,vl53l0x-i2c", },
> + { }
> +};

MODULE_DEVICE_TABLE(of, st_vl53l0x_dt_match); ?


Thanks
--
Himanshu Jha
Undergraduate Student
Department of Electronics & Communication
Guru Tegh Bahadur Institute of Technology

\
 
 \ /
  Last update: 2018-09-14 20:44    [W:0.054 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site