lkml.org 
[lkml]   [2018]   [Sep]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] iio: proximity: lidar-v2: replace i2c block access method with the one already implemented.
Date
This driver tries to access a block of data on a i2c bus and it tries
to manually make a device command frame and a consecutively read frame,
then uses i2c_transfer() to read data. But this has already been
implemented in i2c_smbus_read_i2c_block_data().
Sorry for not having this device by my hand, which is a little expansive
for me, but I have another i2c device and tested with both i2c_transfer()
and i2c_smbus_read_i2c_block_data() and they all ends the same.
I'm not familiar with the SMBus, don't know if the lidar_smbus_xfer()
function is the same as i2c_smbus_read_block_data()? The original code
is commented with something I'm not sure, but I think if it's a standard
SMBus, it should be able to use in here.
Hoping for someone to explain.

Signed-off-by: Song Qiang <songqiang.1304521@gmail.com>
---
.../iio/proximity/pulsedlight-lidar-lite-v2.c | 18 +-----------------
1 file changed, 1 insertion(+), 17 deletions(-)

diff --git a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c
index 47af54f14756..ca880ba8e820 100644
--- a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c
+++ b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c
@@ -63,23 +63,7 @@ static const struct iio_chan_spec lidar_channels[] = {

static int lidar_i2c_xfer(struct lidar_data *data, u8 reg, u8 *val, int len)
{
- struct i2c_client *client = data->client;
- struct i2c_msg msg[2];
- int ret;
-
- msg[0].addr = client->addr;
- msg[0].flags = client->flags | I2C_M_STOP;
- msg[0].len = 1;
- msg[0].buf = (char *) &reg;
-
- msg[1].addr = client->addr;
- msg[1].flags = client->flags | I2C_M_RD;
- msg[1].len = len;
- msg[1].buf = (char *) val;
-
- ret = i2c_transfer(client->adapter, msg, 2);
-
- return (ret == 2) ? 0 : -EIO;
+ return i2c_smbus_read_i2c_block_data(data->client, reg, len, val);
}

static int lidar_smbus_xfer(struct lidar_data *data, u8 reg, u8 *val, int len)
--
2.17.1
\
 
 \ /
  Last update: 2018-09-13 05:52    [W:0.054 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site