lkml.org 
[lkml]   [2018]   [Sep]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH i2c-next v6] i2c: aspeed: Handle master/slave combined irq events properly
From
Date
On 09/13/2018 03:33 PM, Guenter Roeck wrote:
> On 09/12/2018 10:45 PM, Cédric Le Goater wrote
>
> [ ... ]
>
>>> ---
>>> qemu:
>>>
>>> diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c
>>> index c762c73..0d4aa08 100644
>>> --- a/hw/i2c/aspeed_i2c.c
>>> +++ b/hw/i2c/aspeed_i2c.c
>>> @@ -180,6 +180,33 @@ static uint8_t aspeed_i2c_get_state(AspeedI2CBus *bus)
>>>       return (bus->cmd >> I2CD_TX_STATE_SHIFT) & I2CD_TX_STATE_MASK;
>>>   }
>>>   +static void aspeed_i2c_handle_rx_cmd(AspeedI2CBus *bus)
>>> +{
>>> +    int ret;
>>> +
>>> +    if (!(bus->cmd & (I2CD_M_RX_CMD | I2CD_M_S_RX_CMD_LAST))) {
>>> +        return;
>>> +    }
>>
>> it deserves a comment to understand which scenario we are trying to handle.
>>
>>> +    if (bus->intr_status & I2CD_INTR_RX_DONE) {
>>> +        return;
>>> +    }
>>
>> should be handled in aspeed_i2c_bus_handle_cmd() I think
>>
>
> I moved those two checks into the calling code.

ok


>>> +    aspeed_i2c_set_state(bus, I2CD_MRXD);
>>> +    ret = i2c_recv(bus->bus);
>>> +    if (ret < 0) {
>>> +        qemu_log_mask(LOG_GUEST_ERROR, "%s: read failed\n", __func__);
>>> +        ret = 0xff;
>>> +    } else {
>>> +        bus->intr_status |= I2CD_INTR_RX_DONE;
>>> +    }
>>> +    bus->buf = (ret & I2CD_BYTE_BUF_RX_MASK) << I2CD_BYTE_BUF_RX_SHIFT;
>>> +    if (bus->cmd & I2CD_M_S_RX_CMD_LAST) {
>>> +        i2c_nack(bus->bus);
>>> +    }
>>> +    bus->cmd &= ~(I2CD_M_RX_CMD | I2CD_M_S_RX_CMD_LAST);
>>> +    aspeed_i2c_set_state(bus, I2CD_MACTIVE);
>>> +}
>>> +
>>>   /*
>>>    * The state machine needs some refinement. It is only used to track
>>>    * invalid STOP commands for the moment.
>>> @@ -188,7 +215,7 @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value)
>>>   {
>>>       bus->cmd &= ~0xFFFF;
>>>       bus->cmd |= value & 0xFFFF;
>>> -    bus->intr_status = 0;> +    bus->intr_status &= I2CD_INTR_RX_DONE;
>>
>> it deserves a comment to understand which scenario we are trying to handle.
>>   
>
> Ok. FWIW, I wonder if intr_status should be touched here in the first place,
> but I neither have the hardware nor a datasheet, so I don't know if any bits
> are auto-cleared.

I just pushed a patch on my branch with some more explanation :

https://github.com/legoater/qemu/commits/aspeed-3.1

>
>>>       if (bus->cmd & I2CD_M_START_CMD) {
>>>           uint8_t state = aspeed_i2c_get_state(bus) & I2CD_MACTIVE ?
>>> @@ -227,22 +254,7 @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value)
>>>       }
>>>         if (bus->cmd & (I2CD_M_RX_CMD | I2CD_M_S_RX_CMD_LAST)) {
>>> -        int ret;
>>> -
>>> -        aspeed_i2c_set_state(bus, I2CD_MRXD);
>>> -        ret = i2c_recv(bus->bus);
>>> -        if (ret < 0) {
>>> -            qemu_log_mask(LOG_GUEST_ERROR, "%s: read failed\n", __func__);
>>> -            ret = 0xff;
>>> -        } else {
>>> -            bus->intr_status |= I2CD_INTR_RX_DONE;
>>> -        }
>>> -        bus->buf = (ret & I2CD_BYTE_BUF_RX_MASK) << I2CD_BYTE_BUF_RX_SHIFT;
>>> -        if (bus->cmd & I2CD_M_S_RX_CMD_LAST) {
>>> -            i2c_nack(bus->bus);
>>> -        }
>>> -        bus->cmd &= ~(I2CD_M_RX_CMD | I2CD_M_S_RX_CMD_LAST);
>>> -        aspeed_i2c_set_state(bus, I2CD_MACTIVE);
>>> +        aspeed_i2c_handle_rx_cmd(bus);
>>>       }
>>>         if (bus->cmd & I2CD_M_STOP_CMD) {
>>> @@ -263,6 +275,7 @@ static void aspeed_i2c_bus_write(void *opaque, hwaddr offset,
>>>                                    uint64_t value, unsigned size)
>>>   {
>>>       AspeedI2CBus *bus = opaque;
>>> +    int status;
>>>         switch (offset) {
>>>       case I2CD_FUN_CTRL_REG:
>>> @@ -283,9 +296,16 @@ static void aspeed_i2c_bus_write(void *opaque, hwaddr offset,
>>>           bus->intr_ctrl = value & 0x7FFF;
>>>           break;
>>>       case I2CD_INTR_STS_REG:
>>> +        status = bus->intr_status;
>>>           bus->intr_status &= ~(value & 0x7FFF);
>>> -        bus->controller->intr_status &= ~(1 << bus->id);
>>> -        qemu_irq_lower(bus->controller->irq);
>>> +        if (!bus->intr_status) {
>>> +            bus->controller->intr_status &= ~(1 << bus->id);
>>> +            qemu_irq_lower(bus->controller->irq);
>>> +        }
>>
>> That part below is indeed something to fix. I had a similar patch.
>>
>
> Should I split it out as separate patch ? Alternatively, if you submitted
> your patch already, I'll be happy to use it as base for mine.

See below.

Thanks a lot,

C.

From dea796e8d35ba7a70e4b14fbc30ff970a347b195 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?C=C3=A9dric=20Le=20Goater?= <clg@kaod.org>
Date: Thu, 13 Sep 2018 17:44:32 +0200
Subject: [PATCH] aspeed/i2c: lower bus interrupt when all interrupts have been
cleared
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Also include some documentation on the interrupt status bits and how
they should be cleared. Also, the model does not implement correctly
the RX_DONE bit behavior which should be cleared to allow more data to
be received. Yet to be fixed.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
hw/i2c/aspeed_i2c.c | 20 +++++++++++++++++---
1 file changed, 17 insertions(+), 3 deletions(-)

diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c
index c762c7366ad9..275377c2ab38 100644
--- a/hw/i2c/aspeed_i2c.c
+++ b/hw/i2c/aspeed_i2c.c
@@ -52,6 +52,13 @@
#define I2CD_AC_TIMING_REG2 0x08 /* Clock and AC Timing Control #1 */
#define I2CD_INTR_CTRL_REG 0x0c /* I2CD Interrupt Control */
#define I2CD_INTR_STS_REG 0x10 /* I2CD Interrupt Status */
+
+#define I2CD_INTR_SLAVE_ADDR_MATCH (0x1 << 31) /* 0: addr1 1: addr2 */
+#define I2CD_INTR_SLAVE_ADDR_RX_PENDING (0x1 << 30)
+/* bits[19-16] Reserved */
+
+/* All bits below are cleared by writing 1 */
+#define I2CD_INTR_SLAVE_INACTIVE_TIMEOUT (0x1 << 15)
#define I2CD_INTR_SDA_DL_TIMEOUT (0x1 << 14)
#define I2CD_INTR_BUS_RECOVER_DONE (0x1 << 13)
#define I2CD_INTR_SMBUS_ALERT (0x1 << 12) /* Bus [0-3] only */
@@ -59,11 +66,16 @@
#define I2CD_INTR_SMBUS_DEV_ALERT_ADDR (0x1 << 10) /* Removed */
#define I2CD_INTR_SMBUS_DEF_ADDR (0x1 << 9) /* Removed */
#define I2CD_INTR_GCALL_ADDR (0x1 << 8) /* Removed */
-#define I2CD_INTR_SLAVE_MATCH (0x1 << 7) /* use RX_DONE */
+#define I2CD_INTR_SLAVE_ADDR_RX_MATCH (0x1 << 7) /* use RX_DONE */
#define I2CD_INTR_SCL_TIMEOUT (0x1 << 6)
#define I2CD_INTR_ABNORMAL (0x1 << 5)
#define I2CD_INTR_NORMAL_STOP (0x1 << 4)
#define I2CD_INTR_ARBIT_LOSS (0x1 << 3)
+
+/*
+ * TODO: handle correctly I2CD_INTR_RX_DONE which needs to be cleared
+ * to allow next data to be received.
+ */
#define I2CD_INTR_RX_DONE (0x1 << 2)
#define I2CD_INTR_TX_NAK (0x1 << 1)
#define I2CD_INTR_TX_ACK (0x1 << 0)
@@ -284,8 +296,10 @@ static void aspeed_i2c_bus_write(void *opaque, hwaddr offset,
break;
case I2CD_INTR_STS_REG:
bus->intr_status &= ~(value & 0x7FFF);
- bus->controller->intr_status &= ~(1 << bus->id);
- qemu_irq_lower(bus->controller->irq);
+ if (!bus->intr_status) {
+ bus->controller->intr_status &= ~(1 << bus->id);
+ qemu_irq_lower(bus->controller->irq);
+ }
break;
case I2CD_DEV_ADDR_REG:
qemu_log_mask(LOG_UNIMP, "%s: slave mode not implemented\n",
--
2.17.1

\
 
 \ /
  Last update: 2018-09-13 17:58    [W:0.081 / U:0.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site