lkml.org 
[lkml]   [2018]   [Sep]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 01/16] thermal: tsens: Prepare 8916 and 8974 tsens to use SROT and TM address space
Date
We've already converted over the devicetree of platforms using v2
version of the TSENS IP to use two address spaces. Now prepare to
convert over the 8916 and 8974 platforms to use separate SROT and TM
address spaces.

This patch will work with device trees with one or two address spaces
because we set the tm_offset in commit 5b1283984fa3 ("thermal: tsens:
Add support to split up register address space into two").

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
---
drivers/thermal/qcom/tsens-common.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
index 6207d8d92351..478739543bbc 100644
--- a/drivers/thermal/qcom/tsens-common.c
+++ b/drivers/thermal/qcom/tsens-common.c
@@ -21,7 +21,7 @@
#include <linux/regmap.h>
#include "tsens.h"

-#define S0_ST_ADDR 0x1030
+#define STATUS_OFFSET 0x30
#define SN_ADDR_OFFSET 0x4
#define SN_ST_TEMP_MASK 0x3ff
#define CAL_DEGC_PT1 30
@@ -107,8 +107,9 @@ int get_temp_common(struct tsens_device *tmdev, int id, int *temp)
unsigned int status_reg;
int last_temp = 0, ret;

- status_reg = S0_ST_ADDR + s->hw_id * SN_ADDR_OFFSET;
+ status_reg = tmdev->tm_offset + STATUS_OFFSET + s->hw_id * SN_ADDR_OFFSET;
ret = regmap_read(tmdev->map, status_reg, &code);
+
if (ret)
return ret;
last_temp = code & SN_ST_TEMP_MASK;
--
2.17.1
\
 
 \ /
  Last update: 2018-09-12 11:54    [W:0.136 / U:3.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site