lkml.org 
[lkml]   [2018]   [Sep]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/8] regulator: bd71837: Disable voltage monitoring for LDO3/4
On Wed, 12 Sep 2018, Matti Vaittinen wrote:

> On Tue, Sep 11, 2018 at 01:40:29PM +0100, Lee Jones wrote:
> > On Wed, 29 Aug 2018, Matti Vaittinen wrote:
> >
> > > There is a HW quirk in BD71837. The shutdown sequence timings for
> > > bucks/LDOs which are enabled via register interface are changed.
> > > At PMIC poweroff the voltage for BUCK6/7 is cut immediately at the
> > > beginning of shut-down sequence. This causes LDO5/6 voltage
> > > monitoring to detect under voltage and force PMIC to emergency
> > > state instead of poweroff. Disable voltage monitoring for LDO5 and
> > > LDO6 at probe to avoid this.
> > >
> > > Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
> > > ---
> > > drivers/regulator/bd71837-regulator.c | 19 +++++++++++++++++++
> >
> > > include/linux/mfd/rohm-bd718x7.h | 33 ++++++++++++++++++++++++++++++---
> >
> > For my own reference:
> > Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
>
> I m not sure if it is relevant but I think this was already applied to
> Mark's regulator tree.

Where is Mark's acceptance email?

--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2018-09-12 10:43    [W:0.062 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site