lkml.org 
[lkml]   [2018]   [Sep]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/2] dmaengine: uniphier-mdmac: add UniPhier MIO DMAC driver
On 12-09-18, 12:01, Masahiro Yamada wrote:
> Hi Vinod,
>
>
> 2018-09-11 16:00 GMT+09:00 Vinod <vkoul@kernel.org>:
> > On 24-08-18, 10:41, Masahiro Yamada wrote:
> >
> >> +/* mc->vc.lock must be held by caller */
> >> +static u32 __uniphier_mdmac_get_residue(struct uniphier_mdmac_desc *md)
> >> +{
> >> + u32 residue = 0;
> >> + int i;
> >> +
> >> + for (i = md->sg_cur; i < md->sg_len; i++)
> >> + residue += sg_dma_len(&md->sgl[i]);
> >
> > so if the descriptor is submitted to hardware, we return the descriptor
> > length, which is not correct.
> >
> > Two cases are required to be handled:
> > 1. Descriptor is in queue (IMO above logic is fine for that, but it can
> > be calculated at descriptor submit and looked up here)
>
> Where do you want it to be calculated?

where is it calculated now?

> This hardware provides only simple registers (address and size)
> for one-shot transfer instead of descriptors.
>
> So, I used sgl as-is because I did not see a good reason
> to transform sgl to another data structure.


> > this seems missing stuff. Where do you do register calculation for the
> > descriptor and where is slave_config here, how do you know where to
> > send/receive data form/to (peripheral)
>
>
> This dmac is really simple, and un-flexible.
>
> The peripheral address to send/receive data from/to is hard-weird.
> cfg->{src_addr,dst_addr} is not configurable.
>
> Look at __uniphier_mdmac_handle().
> 'dest_addr' and 'src_addr' must be set to 0 for the peripheral.

Fair enough, what about other values like addr_width and maxburst?
--
~Vinod

\
 
 \ /
  Last update: 2018-09-12 06:37    [W:0.048 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site