lkml.org 
[lkml]   [2018]   [Sep]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v9 1/6] ARM: imx6q: provide documentation for new fsl,pmic-stby-poweroff property
I updated the subject as below to make it clear this is a bindings
change.

dt-bindings: imx6q-clock: add new fsl,pmic-stby-poweroff property

Patch applied, thanks.

Shawn

On Thu, Aug 02, 2018 at 12:34:20PM +0200, Oleksij Rempel wrote:
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> Acked-by: Rob Herring <robh@kernel.org>
> ---
> Documentation/devicetree/bindings/clock/imx6q-clock.txt | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
> index a45ca67a9d5f..e1308346e00d 100644
> --- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
> +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
> @@ -6,6 +6,14 @@ Required properties:
> - interrupts: Should contain CCM interrupt
> - #clock-cells: Should be <1>
>
> +Optional properties:
> +- fsl,pmic-stby-poweroff: Configure CCM to assert PMIC_STBY_REQ signal
> + on power off.
> + Use this property if the SoC should be powered off by external power
> + management IC (PMIC) triggered via PMIC_STBY_REQ signal.
> + Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should
> + be using "syscon-poweroff" driver instead.
> +
> The clock consumer should specify the desired clock by having the clock
> ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6qdl-clock.h
> for the full list of i.MX6 Quad and DualLite clock IDs.
> --
> 2.18.0
>

\
 
 \ /
  Last update: 2018-09-12 03:06    [W:0.114 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site