lkml.org 
[lkml]   [2018]   [Sep]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v8 1/2] leds: core: Introduce LED pattern trigger
From
Date
On 09/12/2018 09:18 PM, Pavel Machek wrote:
> Hi!
>
>>>>> diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-pattern b/Documentation/ABI/testing/sysfs-class-led-trigger-pattern
>>>> [..]
>>>>> +What: /sys/class/leds/<led>/hw_pattern
>>>>> +Date: September 2018
>>>>> +KernelVersion: 4.20
>>>>> +Description:
>>>>> + Specify a hardware pattern for the LED, for LED hardware that
>>>>> + supports autonomously controlling brightness over time, according
>>>>> + to some preprogrammed hardware patterns.
>>>>> +
>>>>> + Since different LED hardware can have different semantics of
>>>>> + hardware patterns, each driver is expected to provide its own
>>>>> + description for the hardware patterns in their ABI documentation
>>>>> + file.
>>>>> +
>>>>
>>>> So, after a full circle we're back at drivers with support for hardware
>>>> patterns should have their own ABI for setting that pattern.
>>>>
>>>> The controls for my hardware is:
>>>> * a list of brightness values
>>>> * the rate of the pattern
>>>> * a flag to indicate that the pattern should be played from start
>>>> to end, end to start or start to end to start
>>>> * a boolean indicating if the pattern should be played once or repeated
>>>> indefinitely.
>>>
>>> No, we are not back to full circle.
>>>
>>> Or at least we should not be.
>>>
>>> Yes, hw_pattern can have some limitation pattern does not, but if you
>>> take values from hw_pattern file and put them into pattern file, you
>>> should get the same pattern (with more power being consumed). And that
>>> property is kind of important for me, because it should keep the ABI
>>> reasonable.
>>
>> If you looked at what we agreed on with Baolin, you'd realize
>> that this property is in no way preserved.
>> This is what the whole story is about - we're introducing hw_pattern
>> because of difficulties in describing breathing pattern by a series
>> of [brightness delta_t] tuples.
>>
>> And Bjorn presented another example. I'm inclined to leave the
>> definition of hw_pattern semantics to the LED class drivers,
>> and allow them to create related sysfs files.
>
> Please lets not do that.
>
> We already have drivers that do that and it is complete
> nightmare. Some take binary code for the tiny CPU driving the LED.
>
> What exactly is the problem? [brightness delta_t] can describe

You wrote:

<quote>
Yes, hw_pattern can have some limitation pattern does not, but if you
take values from hw_pattern file and put them into pattern file, you
should get the same pattern (with more power being consumed).
</quote>

The problem is that we decided to introduce hw_pattern to
to take away from drivers a responsibility for translating
a series of tuples, approximating the brightness curve,
to the values that can be written to the hardware registers.

Because this is what would need to be done to check if hw can support
given series of tuples and activate it. Actually with this approach
we wouldn't need hw_pattern at all, since pattern alone would do.
But implementation thereof is what we could call a nightmare.

What follows, your claim from the quotation is inaccurate:
values from hw_pattern written to the pattern file will not
produce the same pattern, at least in case of what was proposed
in [0] for drivers/leds/leds-sc27xx-bltc.c.

> anything single LED can do in finite time. You are right, that
> [brightness delta_t] sequence may get rather long, and it may be hard
> to turn that sequence into parameters. Are there any _interesting_
> sequences hardware can do but [brightness delta_t] can not store
> reasonably?

Please propose the implementation of pattern_set for
drivers/leds/leds-sc27xx-bltc.c breathing pattern, that will
setup breathing mode basing on the values from tuples.

Use Baolin's patch [0] for a reference of what hardware expects.

[0] https://lore.kernel.org/patchwork/patch/984246/

--
Best regards,
Jacek Anaszewski

\
 
 \ /
  Last update: 2018-09-12 22:19    [W:1.854 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site