lkml.org 
[lkml]   [2018]   [Sep]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 1/3] mfd: ti-lmu: switch to gpiod
Use new descriptor based API instead of the legacy one.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

diff --git a/drivers/mfd/ti-lmu.c b/drivers/mfd/ti-lmu.c
index 990437e..e14cb9f 100644
--- a/drivers/mfd/ti-lmu.c
+++ b/drivers/mfd/ti-lmu.c
@@ -12,7 +12,7 @@

#include <linux/delay.h>
#include <linux/err.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/kernel.h>
#include <linux/mfd/core.h>
@@ -21,7 +21,6 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
-#include <linux/of_gpio.h>
#include <linux/slab.h>

struct ti_lmu_data {
@@ -32,17 +31,8 @@ struct ti_lmu_data {

static int ti_lmu_enable_hw(struct ti_lmu *lmu, enum ti_lmu_id id)
{
- int ret;
-
- if (gpio_is_valid(lmu->en_gpio)) {
- ret = devm_gpio_request_one(lmu->dev, lmu->en_gpio,
- GPIOF_OUT_INIT_HIGH, "lmu_hwen");
- if (ret) {
- dev_err(lmu->dev, "Can not request enable GPIO: %d\n",
- ret);
- return ret;
- }
- }
+ if (lmu->en_gpio)
+ gpiod_set_value(lmu->en_gpio, 1);

/* Delay about 1ms after HW enable pin control */
usleep_range(1000, 1500);
@@ -59,8 +49,8 @@ static int ti_lmu_enable_hw(struct ti_lmu *lmu, enum ti_lmu_id id)

static void ti_lmu_disable_hw(struct ti_lmu *lmu)
{
- if (gpio_is_valid(lmu->en_gpio))
- gpio_set_value(lmu->en_gpio, 0);
+ if (lmu->en_gpio)
+ gpiod_set_value(lmu->en_gpio, 0);
}

static const struct mfd_cell lm3532_devices[] = {
@@ -204,7 +194,13 @@ static int ti_lmu_probe(struct i2c_client *cl, const struct i2c_device_id *id)
return PTR_ERR(lmu->regmap);

/* HW enable pin control and additional power up sequence if required */
- lmu->en_gpio = of_get_named_gpio(dev->of_node, "enable-gpios", 0);
+ lmu->en_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_HIGH);
+ if (IS_ERR(lmu->en_gpio)) {
+ ret = PTR_ERR(lmu->en_gpio);
+ dev_err(dev, "Can not request enable GPIO: %d\n", ret);
+ return ret;
+ }
+
ret = ti_lmu_enable_hw(lmu, id->driver_data);
if (ret)
return ret;
diff --git a/include/linux/mfd/ti-lmu.h b/include/linux/mfd/ti-lmu.h
index 09d5f30..1ef51ed 100644
--- a/include/linux/mfd/ti-lmu.h
+++ b/include/linux/mfd/ti-lmu.h
@@ -16,6 +16,7 @@
#include <linux/gpio.h>
#include <linux/notifier.h>
#include <linux/regmap.h>
+#include <linux/gpio/consumer.h>

/* Notifier event */
#define LMU_EVENT_MONITOR_DONE 0x01
@@ -81,7 +82,7 @@ enum lm363x_regulator_id {
struct ti_lmu {
struct device *dev;
struct regmap *regmap;
- int en_gpio;
+ struct gpio_desc *en_gpio;
struct blocking_notifier_head notifier;
};
#endif

--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-09-11 23:02    [W:0.055 / U:1.716 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site