lkml.org 
[lkml]   [2018]   [Sep]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/2] dmaengine: doc: Add sections for per descriptor metadata support
On 30-08-18, 15:19, Peter Ujfalusi wrote:
> Update the provider and client documentation with details about the
> metadata support.

It would make sense to make this patch 1 :)

>
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
> ---
> Documentation/driver-api/dmaengine/client.rst | 70 +++++++++++++++++++
> .../driver-api/dmaengine/provider.rst | 46 ++++++++++++
> 2 files changed, 116 insertions(+)
>
> diff --git a/Documentation/driver-api/dmaengine/client.rst b/Documentation/driver-api/dmaengine/client.rst
> index fbbb2831f29f..584a39347cfe 100644
> --- a/Documentation/driver-api/dmaengine/client.rst
> +++ b/Documentation/driver-api/dmaengine/client.rst
> @@ -151,6 +151,76 @@ The details of these operations are:
> Note that callbacks will always be invoked from the DMA
> engines tasklet, never from interrupt context.
>
> + Optional: per descriptor metadata
> + ---------------------------------
> + DMAengine provides two ways for metadata support.
> +
> + DESC_METADATA_CLIENT
> +
> + The metadata buffer is allocated/provided by the client driver and it is
> + attached to the descriptor.
> +
> + .. code-block:: c
> +
> + int dmaengine_desc_attach_metadata(struct dma_async_tx_descriptor *desc,
> + void *data, size_t len);
> +
> + DESC_METADATA_ENGINE
> +
> + The metadata buffer is allocated/managed by the DMA driver. The client
> + driver can ask for the pointer, maximum size and the currently used size of
> + the metadata and can directly update or read it.
> +
> + .. code-block:: c
> +
> + void *dmaengine_desc_get_metadata_ptr(struct dma_async_tx_descriptor *desc,
> + size_t *payload_len, size_t *max_len);
> +
> + int dmaengine_desc_set_metadata_len(struct dma_async_tx_descriptor *desc,
> + size_t payload_len);
> +
> + Client drivers can query if a given mode is supported with:
> +
> + .. code-block:: c
> +
> + bool dmaengine_is_metadata_mode_supported(struct dma_chan *chan,
> + enum dma_desc_metadata_mode mode);
> +
> + Depending on the used mode client drivers must follow different flow.
> +
> + DESC_METADATA_CLIENT
> +
> + - DMA_MEM_TO_DEV / DEV_MEM_TO_MEM:
> + 1. prepare the descriptor (dmaengine_prep_*)
> + construct the metadata in the client's buffer
> + 2. use dmaengine_desc_attach_metadata() to attach the buffer to the
> + descriptor
> + 3. submit the transfer
> + - DMA_DEV_TO_MEM:
> + 1. prepare the descriptor (dmaengine_prep_*)
> + 2. use dmaengine_desc_attach_metadata() to attach the buffer to the
> + descriptor
> + 3. submit the transfer
> + 4. when the transfer is completed, the metadata should be available in the
> + attached buffer
> +
> + DESC_METADATA_ENGINE
> +
> + - DMA_MEM_TO_DEV / DEV_MEM_TO_MEM:
> + 1. prepare the descriptor (dmaengine_prep_*)
> + 2. use dmaengine_desc_get_metadata_ptr() to get the pointer to the
> + engine's metadata area
> + 3. update the metadata at the pointer
> + 4. use dmaengine_desc_set_metadata_len() to tell the DMA engine the
> + amount of data the client has placed into the metadata buffer
> + 5. submit the transfer
> + - DMA_DEV_TO_MEM:
> + 1. prepare the descriptor (dmaengine_prep_*)
> + 2. submit the transfer
> + 3. on transfer completion, use dmaengine_desc_get_metadata_ptr() to get the
> + pointer to the engine's metadata are
> + 4. Read out the metadate from the pointer

Lets put a note here that only one method should be used

> +
> 4. Submit the transaction
>
> Once the descriptor has been prepared and the callback information
> diff --git a/Documentation/driver-api/dmaengine/provider.rst b/Documentation/driver-api/dmaengine/provider.rst
> index dfc4486b5743..502c59f75302 100644
> --- a/Documentation/driver-api/dmaengine/provider.rst
> +++ b/Documentation/driver-api/dmaengine/provider.rst
> @@ -247,6 +247,52 @@ after each transfer. In case of a ring buffer, they may loop
> (DMA_CYCLIC). Addresses pointing to a device's register (e.g. a FIFO)
> are typically fixed.
>
> +Per descriptor metadata support
> +-------------------------------
> +Some data movement architecure (DMA controller and peripherals) uses metadata

typo architecure

> +associated with a transaction. The DMA controller role is to transfer the
> +payload and the metadata alongside.
> +The metadata itself is not used by the DMA engine itself, but it contains
> +parameters, keys, vectors, etc for peripheral or from the peripheral.
> +
> +The DMAengine framework provides a generic ways to facilitate the metadata for
> +descriptors. Depending on the architecture the DMA driver can implment either

implment
--
~Vinod

\
 
 \ /
  Last update: 2018-09-11 09:37    [W:1.479 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site