lkml.org 
[lkml]   [2018]   [Sep]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v11 08/11] firmware: xilinx: Add debugfs for query data API
Date
Hi Olof,

> -----Original Message-----
> From: Olof Johansson [mailto:olof@lixom.net]
> Sent: Saturday, September 08, 2018 6:15 PM
> To: Jolly Shah <JOLLYS@xilinx.com>
> Cc: ard.biesheuvel@linaro.org; Ingo Molnar <mingo@kernel.org>; Greg Kroah-
> Hartman <gregkh@linuxfoundation.org>; matt@codeblueprint.co.uk; Sudeep
> Holla <sudeep.holla@arm.com>; hkallweit1@gmail.com; Kees Cook
> <keescook@chromium.org>; Dmitry Torokhov <dmitry.torokhov@gmail.com>;
> Michael Turquette <mturquette@baylibre.com>; Stephen Boyd
> <sboyd@codeaurora.org>; Michal Simek <michals@xilinx.com>; Rob Herring
> <robh+dt@kernel.org>; Mark Rutland <mark.rutland@arm.com>; linux-clk
> <linux-clk@vger.kernel.org>; Rajan Vaja <RAJANV@xilinx.com>; Linux ARM
> Mailing List <linux-arm-kernel@lists.infradead.org>; Linux Kernel Mailing List
> <linux-kernel@vger.kernel.org>; DTML <devicetree@vger.kernel.org>; Jolly
> Shah <JOLLYS@xilinx.com>
> Subject: Re: [PATCH v11 08/11] firmware: xilinx: Add debugfs for query data API
>
> Hi,
>
> I noticed the below when I was reviewing the code for merge into arm-soc.
> Would you mind following up with an incremental patch? I don't think we need
> to ask Michal to respin for this:
>

Sure. I will submit incremental patches for suggested changes.

Thanks,
Jolly Shah


> On Fri, Aug 3, 2018 at 10:53 AM, Jolly Shah <jolly.shah@xilinx.com> wrote:
> > From: Rajan Vaja <rajanv@xilinx.com>
> >
> > Add debugfs file to query platform specific data from firmware using
> > debugfs interface.
> >
> > Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
> > Signed-off-by: Jolly Shah <jollys@xilinx.com>
> > ---
> > drivers/firmware/xilinx/zynqmp-debug.c | 27
> > +++++++++++++++++++++++++++
> > 1 file changed, 27 insertions(+)
> >
> > diff --git a/drivers/firmware/xilinx/zynqmp-debug.c
> > b/drivers/firmware/xilinx/zynqmp-debug.c
> > index fc11db9..4532bd0 100644
> > --- a/drivers/firmware/xilinx/zynqmp-debug.c
> > +++ b/drivers/firmware/xilinx/zynqmp-debug.c
> > @@ -33,6 +33,7 @@ static char debugfs_buf[PAGE_SIZE]; static struct
> > pm_api_info pm_api_list[] = {
> > PM_API(PM_GET_API_VERSION),
> > PM_API(PM_IOCTL),
> > + PM_API(PM_QUERY_DATA),
> > };
> >
> > /**
> > @@ -105,6 +106,32 @@ static int process_api_request(u32 pm_id, u64
> *pm_api_arg, u32 *pm_api_ret)
> > sprintf(debugfs_buf, "IOCTL return value: %u\n",
> > pm_api_ret[1]);
> > break;
> > + case PM_QUERY_DATA:
> > + {
> > + struct zynqmp_pm_query_data qdata = {0};
> > +
> > + qdata.qid = pm_api_arg[0];
> > + qdata.arg1 = pm_api_arg[1];
> > + qdata.arg2 = pm_api_arg[2];
> > + qdata.arg3 = pm_api_arg[3];
>
> This is usually a pattern we try to avoid (having full code blocks in a switch
> statement, and local variables).
>
> Please move the declaration of qdata to the top of the function so you can drop
> the braces.
>
> > +
> > + ret = eemi_ops->query_data(qdata, pm_api_ret);
> > + if (ret)
> > + break;
> > +
> > + if (qdata.qid == PM_QID_CLOCK_GET_NAME)
> > + sprintf(debugfs_buf, "Clock name = %s\n",
> > + (char *)pm_api_ret);
> > + else if (qdata.qid == PM_QID_CLOCK_GET_FIXEDFACTOR_PARAMS)
> > + sprintf(debugfs_buf, "Multiplier = %d, Divider = %d\n",
> > + pm_api_ret[1], pm_api_ret[2]);
> > + else
> > + sprintf(debugfs_buf,
> > + "data[0] = 0x%08x\ndata[1] = 0x%08x\n data[2] =
> 0x%08x\ndata[3] = 0x%08x\n",
> > + pm_api_ret[0], pm_api_ret[1],
> > + pm_api_ret[2], pm_api_ret[3]);
>
> If you anticipate more qids here later, a switch could be nicer than a sequence of
> if/else.
>
>
>
> -Olof
\
 
 \ /
  Last update: 2018-09-10 21:19    [W:0.094 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site