lkml.org 
[lkml]   [2018]   [Sep]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/5] include: add setbits32/clrbits32/clrsetbits32/setbits64/clrbits64/clrsetbits64 in linux/setbits.h
On Fri, Sep 07, 2018 at 03:00:40PM -0500, Scott Wood wrote:
> On Fri, 2018-09-07 at 19:41 +0000, Corentin Labbe wrote:
> > This patch adds setbits32/clrbits32/clrsetbits32 and
> > setbits64/clrbits64/clrsetbits64 in linux/setbits.h header.
> >
> > Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
> > ---
> > include/linux/setbits.h | 55
> > +++++++++++++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 55 insertions(+)
> > create mode 100644 include/linux/setbits.h
> >
> > diff --git a/include/linux/setbits.h b/include/linux/setbits.h
> > new file mode 100644
> > index 000000000000..3e1e273551bb
> > --- /dev/null
> > +++ b/include/linux/setbits.h
> > @@ -0,0 +1,55 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +#ifndef __LINUX_SETBITS_H
> > +#define __LINUX_SETBITS_H
> > +
> > +#include <linux/io.h>
> > +
> > +#define __setbits(readfunction, writefunction, addr, set) \
> > + writefunction((readfunction(addr) | (set)), addr)
> > +#define __clrbits(readfunction, writefunction, addr, mask) \
> > + writefunction((readfunction(addr) & ~(mask)), addr)
> > +#define __clrsetbits(readfunction, writefunction, addr, mask, set) \
> > + writefunction(((readfunction(addr) & ~(mask)) | (set)), addr)
> > +#define __setclrbits(readfunction, writefunction, addr, mask, set) \
> > + writefunction(((readfunction(addr) | (seti)) & ~(mask)), addr)
> > +
> > +#define setbits32(addr, set) __setbits(readl, writel, addr, set)
> > +#define setbits32_relaxed(addr, set) __setbits(readl_relaxed,
> > writel_relaxed, \
> > + addr, set)
> > +
> > +#define clrbits32(addr, mask) __clrbits(readl, writel, addr, mask)
> > +#define clrbits32_relaxed(addr, mask) __clrbits(readl_relaxed,
> > writel_relaxed, \
> > + addr, mask)
>
> So now setbits32/clrbits32 is implicitly little-endian? Introducing new
> implicit-endian accessors is probably a bad thing in general, but doing it
> with a name that until this patchset was implicitly big-endian (at least on
> powerpc) seems worse. Why not setbits32_le()?
>

I believed that writel/readl was endian agnostic, but It seems that I was wrong.
So I will use _le32.

>
> > +
> > +#define clrsetbits32(addr, mask, set) __clrsetbits(readl, writel, addr,
> > mask, set)
> > +#define clrsetbits32_relaxed(addr, mask, set) __clrsetbits(readl_relaxed, \
> > + writel_relaxed,
> > \
> > + addr, mask, set)
> > +
> > +#define setclrbits32(addr, mask, set) __setclrbits(readl, writel, addr,
> > mask, set)
> > +#define setclrbits32_relaxed(addr, mask, set) __setclrbits(readl_relaxed, \
> > + writel_relaxed,
> > \
> > + addr, mask, set)
>
> What's the use case for setclrbits? I don't see it used anywhere in this
> patchset (not even in the coccinelle patterns), it doesn't seem like it would
> be a common pattern, and it could easily get confused with clrsetbits.
>

It is absent from the coccinelle script due to copy/paste error.
And absent from patchset since it is only two possible example that I can test.

If you run the next fixed coccinelle script, you will find some setclrbits.
Since I fear that mask and set could have some common bits sometimes, I prefer to keep separate clrsetbits and setclrbits.

Regards

\
 
 \ /
  Last update: 2018-09-10 20:51    [W:0.073 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site