lkml.org 
[lkml]   [2018]   [Sep]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] arm64: dts: rockchip: add i2s and spdif endpoint of rk3328
Date
Hi,

Am Donnerstag, 6. September 2018, 18:39:56 CEST schrieb Katsuhiro Suzuki:
> This patch adds port and endpoint of i2s and spdif nodes for rk3328.
> Because to use modern sound card interface such as audio-graph-card.
>
> Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
> ---
> arch/arm64/boot/dts/rockchip/rk3328.dtsi | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> index d3ef6566325e..41f0a20b73ed 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> @@ -179,7 +179,13 @@
> clock-names = "i2s_clk", "i2s_hclk";
> dmas = <&dmac 11>, <&dmac 12>;
> dma-names = "tx", "rx";
> + #sound-dai-cells = <0>;
> status = "disabled";
> +
> + i2s0_p0: port@0 {

there is only one port per device, so this should probably be
i2s0_p0: port {
without the address. Same for all others.
The of-graph framework should work just fine then as well.

Heiko


\
 
 \ /
  Last update: 2018-09-10 15:58    [W:0.406 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site