lkml.org 
[lkml]   [2018]   [Sep]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/5] dt-bindings: spi/spi-pxa2xx: add PXA2xx SSP SPI Controller
Date
This is the SPI controller found on Marvel MMP2 and perhaps more
platforms.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
.../devicetree/bindings/spi/spi-pxa2xx.txt | 24 +++++++++++++++++++
1 file changed, 24 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/spi-pxa2xx.txt

diff --git a/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt b/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt
new file mode 100644
index 000000000000..75be87cf9909
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt
@@ -0,0 +1,24 @@
+PXA2xx SSP SPI Controller
+
+Required properties:
+- compatible: Must be "marvell,mmp2-ssp".
+- reg: Offset and length of the device's register set.
+- interrupts: Should be the interrupt number.
+- clocks: Should contain a single entry describing the clock input.
+- #address-cells: Number of cells required to define a chip select address.
+- #size-cells: Should be zero.
+
+Optional properties:
+- cs-gpios: list of GPIO chip selects. See the SPI bus bindings,
+ Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Child nodes represent devices on the SPI bus
+ See ../spi/spi-bus.txt
+
+Example:
+ ssp1: ssp@d4035000 {
+ compatible = "marvell,mmp2-ssp";
+ reg = <0xd4035000 0x1000>;
+ clocks = <&soc_clocks MMP2_CLK_SSP0>;
+ interrupts = <0>;
+ };
--
2.17.1
\
 
 \ /
  Last update: 2018-09-10 14:01    [W:0.079 / U:2.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site