lkml.org 
[lkml]   [2018]   [Sep]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 3/3] mtd: mtdconcat: add dt driver for concat devices
On Sat, Sep 8, 2018 at 8:20 AM Bernhard Frauendienst
<kernel@nospam.obeliks.de> wrote:
>
> Some mtd drivers like physmap variants have support for concatenating
> multiple mtd devices, but there is no generic way to define such a
> concat device from within the device tree.

That is the generic way, but I suppose that only works for parallel
memory mapped devices. So is it just spi-nor that you need to support?
Can we just make reg take multiple chip selects just like the existing
support takes multiple reg entries?

> This is useful for some SoC boards that use multiple flash chips as
> memory banks of a single mtd device, with partitions spanning chip
> borders.
>
> This commit adds a driver for creating virtual mtd-concat devices. They
> must have a compatible = "mtd-concat" line, and define a list of devices
> to concat in the 'devices' property, for example:
>
> flash {
> compatible = "mtd-concat";
>
> devices = <&flash0 &flash1>;
>
> partitions {
> ...
> };
> };
>
> The driver is added to the very end of the mtd Makefile to increase the
> likelyhood of all child devices already being loaded at the time of
> probing, preventing unnecessary deferred probes.
>
> Signed-off-by: Bernhard Frauendienst <kernel@nospam.obeliks.de>
> ---
> drivers/mtd/Kconfig | 2 +
> drivers/mtd/Makefile | 3 +
> drivers/mtd/composite/Kconfig | 12 +++
> drivers/mtd/composite/Makefile | 7 ++
> drivers/mtd/composite/virt_concat.c | 128 ++++++++++++++++++++++++++++
> 5 files changed, 152 insertions(+)
> create mode 100644 drivers/mtd/composite/Kconfig
> create mode 100644 drivers/mtd/composite/Makefile
> create mode 100644 drivers/mtd/composite/virt_concat.c
>
> diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
> index c77f537323ec..6345d886d458 100644
> --- a/drivers/mtd/Kconfig
> +++ b/drivers/mtd/Kconfig
> @@ -339,4 +339,6 @@ source "drivers/mtd/spi-nor/Kconfig"
>
> source "drivers/mtd/ubi/Kconfig"
>
> +source "drivers/mtd/composite/Kconfig"
> +
> endif # MTD
> diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
> index 93473d215a38..57af7190b063 100644
> --- a/drivers/mtd/Makefile
> +++ b/drivers/mtd/Makefile
> @@ -36,3 +36,6 @@ obj-y += chips/ lpddr/ maps/ devices/ nand/ tests/
>
> obj-$(CONFIG_MTD_SPI_NOR) += spi-nor/
> obj-$(CONFIG_MTD_UBI) += ubi/
> +
> +# Composite drivers must be loaded last
> +obj-y += composite/
> diff --git a/drivers/mtd/composite/Kconfig b/drivers/mtd/composite/Kconfig
> new file mode 100644
> index 000000000000..0490fc0284bb
> --- /dev/null
> +++ b/drivers/mtd/composite/Kconfig
> @@ -0,0 +1,12 @@
> +menu "Composite MTD device drivers"
> + depends on MTD!=n
> +
> +config MTD_VIRT_CONCAT
> + tristate "Virtual concat MTD device"
> + help
> + This driver allows creation of a virtual MTD concat device, which
> + concatenates multiple underlying MTD devices to a single device.
> + This is required by some SoC boards where multiple memory banks are
> + used as one device with partitions spanning across device boundaries.
> +
> +endmenu
> diff --git a/drivers/mtd/composite/Makefile b/drivers/mtd/composite/Makefile
> new file mode 100644
> index 000000000000..8421a0a30606
> --- /dev/null
> +++ b/drivers/mtd/composite/Makefile
> @@ -0,0 +1,6 @@
> +# SPDX-License-Identifier: GPL-2.0
> +#
> +# linux/drivers/mtd/composite/Makefile
> +#
> +
> +obj-$(CONFIG_MTD_VIRT_CONCAT) += virt_concat.o
> diff --git a/drivers/mtd/composite/virt_concat.c b/drivers/mtd/composite/virt_concat.c
> new file mode 100644
> index 000000000000..76918d4ef07f
> --- /dev/null
> +++ b/drivers/mtd/composite/virt_concat.c
> @@ -0,0 +1,128 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Virtual concat MTD device driver
> + *
> + * Copyright (C) 2018 Bernhard Frauendienst
> + * Author: Bernhard Frauendienst, kernel@nospam.obeliks.de
> + */
> +
> +#include <linux/module.h>
> +#include <linux/device.h>
> +#include <linux/mtd/concat.h>
> +#include <linux/mtd/mtd.h>
> +#include <linux/mtd/partitions.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
> +#include <linux/slab.h>
> +
> +/*
> + * struct of_virt_concat - platform device driver data.
> + * @cmtd the final mtd_concat device
> + * @num_devices the number of devices in @devices
> + * @devices points to an array of devices already loaded
> + */
> +struct of_virt_concat {
> + struct mtd_info *cmtd;
> + int num_devices;
> + struct mtd_info **devices;
> +};
> +
> +static int virt_concat_remove(struct platform_device *pdev)
> +{
> + struct of_virt_concat *info;
> + int i;
> +
> + info = platform_get_drvdata(pdev);
> + if (!info)
> + return 0;
> +
> + // unset data for when this is called after a probe error
> + platform_set_drvdata(pdev, NULL);
> +
> + if (info->cmtd) {
> + mtd_device_unregister(info->cmtd);
> + mtd_concat_destroy(info->cmtd);
> + }
> +
> + if (info->devices) {
> + for (i = 0; i < info->num_devices; i++)
> + put_mtd_device(info->devices[i]);
> + }
> +
> + return 0;
> +}
> +
> +static int virt_concat_probe(struct platform_device *pdev)
> +{
> + struct device_node *node = pdev->dev.of_node;
> + struct of_phandle_iterator it;
> + struct of_virt_concat *info;
> + struct mtd_info *mtd;
> + int err = 0, count;
> +
> + count = of_count_phandle_with_args(node, "devices", NULL);
> + if (count <= 0)
> + return -EINVAL;
> +
> + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
> + if (!info)
> + return -ENOMEM;
> + info->devices = devm_kcalloc(&pdev->dev, count,
> + sizeof(*(info->devices)), GFP_KERNEL);
> + if (!info->devices) {
> + err = -ENOMEM;
> + goto err_remove;
> + }
> +
> + platform_set_drvdata(pdev, info);
> +
> + of_for_each_phandle(&it, err, node, "devices", NULL, 0) {
> + mtd = get_mtd_device_by_node(it.node);
> + if (IS_ERR(mtd)) {
> + of_node_put(it.node);
> + err = -EPROBE_DEFER;
> + goto err_remove;
> + }
> +
> + info->devices[info->num_devices++] = mtd;
> + }
> +
> + info->cmtd = mtd_concat_create(info->devices, info->num_devices,
> + dev_name(&pdev->dev));
> + if (!info->cmtd) {
> + err = -ENXIO;
> + goto err_remove;
> + }
> +
> + info->cmtd->dev.parent = &pdev->dev;
> + mtd_set_of_node(info->cmtd, node);
> + mtd_device_register(info->cmtd, NULL, 0);
> +
> + return 0;
> +
> +err_remove:
> + virt_concat_remove(pdev);
> +
> + return err;
> +}
> +
> +static const struct of_device_id virt_concat_of_match[] = {
> + { .compatible = "mtd-concat", },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, virt_concat_of_match);
> +
> +static struct platform_driver virt_concat_driver = {
> + .probe = virt_concat_probe,
> + .remove = virt_concat_remove,
> + .driver = {
> + .name = "virt-mtdconcat",
> + .of_match_table = virt_concat_of_match,
> + },
> +};
> +
> +module_platform_driver(virt_concat_driver);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Bernhard Frauendienst <kernel@nospam.obeliks.de>");
> +MODULE_DESCRIPTION("Virtual concat MTD device driver");
> --
> 2.18.0
>

\
 
 \ /
  Last update: 2018-09-10 23:48    [W:0.079 / U:0.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site