lkml.org 
[lkml]   [2018]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2] dt-bindings: media: adv7604: Fix slave map documentation
Date
Hi Kieran,

Thank you for the patch.

On Wednesday, 8 August 2018 19:33:51 EEST Kieran Bingham wrote:
> The reg-names property in the documentation is missing an '='. Add it.
>
> Fixes: 9feb786876c7 ("media: dt-bindings: media: adv7604: Extend
> bindings to allow specifying slave map addresses")
>
> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
> v2:
> - Commit title changed to prefix as "dt-bindings: media:"
>
> If this is collected through a DT tree, I assume therefore this will be
> fine, but if it is to go through the media-tree, please update as
> necessaary to prevent the redundant dual "media:" tagging.

I assume Hans will take the patch in his tree and submit a pull request.
Mauro, this will then require special handling to avoid a rewrite of the
subject.

> (I'll leave it to the maintainers to decide whose tree thise should go
> through)
>
> Thanks
>
> Kieran
>
> Documentation/devicetree/bindings/media/i2c/adv7604.txt | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.txt
> b/Documentation/devicetree/bindings/media/i2c/adv7604.txt index
> dcf57e7c60eb..b3e688b77a38 100644
> --- a/Documentation/devicetree/bindings/media/i2c/adv7604.txt
> +++ b/Documentation/devicetree/bindings/media/i2c/adv7604.txt
> @@ -66,7 +66,7 @@ Example:
> * other maps will retain their default addresses.
> */
> reg = <0x4c>, <0x66>;
> - reg-names "main", "edid";
> + reg-names = "main", "edid";
>
> reset-gpios = <&ioexp 0 GPIO_ACTIVE_LOW>;
> hpd-gpios = <&ioexp 2 GPIO_ACTIVE_HIGH>;

--
Regards,

Laurent Pinchart



\
 
 \ /
  Last update: 2018-08-08 18:37    [W:0.034 / U:0.960 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site