lkml.org 
[lkml]   [2018]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 08/18] serial: intel: Get serial id from dts
From
Date


On 8/7/2018 3:33 PM, Geert Uytterhoeven wrote:
> Hi Songjun,
>
> On Fri, Aug 3, 2018 at 5:04 AM Songjun Wu <songjun.wu@linux.intel.com> wrote:
>> Get serial id from dts.
>>
>> "#ifdef CONFIG_LANTIQ" preprocessor is used because LTQ_EARLY_ASC
>> macro is defined in lantiq_soc.h.
>> lantiq_soc.h is in arch path for legacy product support.
>>
>> arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
>>
>> If "#ifdef preprocessor" is changed to
>> "if (IS_ENABLED(CONFIG_LANTIQ))", when CONFIG_LANTIQ is not enabled,
>> code using LTQ_EARLY_ASC is compiled.
>> Compilation will fail for no LTQ_EARLY_ASC defined.
>>
>> Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com>
> Thanks for your patch!
>
>> @@ -699,9 +700,19 @@ lqasc_probe(struct platform_device *pdev)
>> return -ENODEV;
>> }
>>
>> - /* check if this is the console port */
>> - if (mmres->start != CPHYSADDR(LTQ_EARLY_ASC))
>> - line = 1;
>> + /* get serial id */
>> + line = of_alias_get_id(node, "serial");
>> + if (line < 0) {
>> +#ifdef CONFIG_LANTIQ
>> + if (mmres->start == CPHYSADDR(LTQ_EARLY_ASC))
>> + line = 0;
>> + else
>> + line = 1;
>> +#else
>> + dev_err(&pdev->dev, "failed to get alias id, errno %d\n", line);
>> + return line;
> Please note that not providing a fallback here makes life harder when using
> DT overlays.
> See the description of commit 7678f4c20fa7670f ("serial: sh-sci: Add support
> for dynamic instances") for background info.
Thanks for your comment.
The logic in commit 7678f4c20fa7670f is not suitable here.
We need to know which serial instance is used for console.
We cannot use dynamic serial instance here.


\
 
 \ /
  Last update: 2018-08-08 06:05    [W:0.574 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site