lkml.org 
[lkml]   [2018]   [Aug]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[RFC PATCH v2 03/12] ARM: OMAP1: ams-delta: Provide GPIO lookup table for NAND data port
    Date
    Data port used by Amstrad Delta NAND driver is actually an OMAP MPUIO
    device, already under control of gpio-omap driver. The NAND driver
    gets access to the port by ioremapping it and performs read/write
    operations. That is done without any proteciton from other users
    legally manipulating the port pins over GPIO API.

    The plan is to convert the driver to access the port over GPIO consumer
    API. Before that is implemented, the driver can already obtain
    exclusive access to the port by requesting an array of its GPIO
    descriptors.

    Add respective entries to the NAND GPIO lookup table.

    Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
    ---
    arch/arm/mach-omap1/board-ams-delta.c | 11 ++++++++++-
    1 file changed, 10 insertions(+), 1 deletion(-)

    diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
    index eedacdfe9725..16f7bbe47607 100644
    --- a/arch/arm/mach-omap1/board-ams-delta.c
    +++ b/arch/arm/mach-omap1/board-ams-delta.c
    @@ -337,7 +337,8 @@ static struct platform_device ams_delta_nand_device = {
    .resource = ams_delta_nand_resources,
    };

    -#define OMAP_GPIO_LABEL "gpio-0-15"
    +#define OMAP_GPIO_LABEL "gpio-0-15"
    +#define OMAP_MPUIO_LABEL "mpuio"

    static struct gpiod_lookup_table ams_delta_nand_gpio_table = {
    .table = {
    @@ -349,6 +350,14 @@ static struct gpiod_lookup_table ams_delta_nand_gpio_table = {
    GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_NWE, "nwe", 0),
    GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_ALE, "ale", 0),
    GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_CLE, "cle", 0),
    + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 0, "data", 0, 0),
    + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 1, "data", 1, 0),
    + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 2, "data", 2, 0),
    + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 3, "data", 3, 0),
    + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 4, "data", 4, 0),
    + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 5, "data", 5, 0),
    + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 6, "data", 6, 0),
    + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 7, "data", 7, 0),
    { },
    },
    };
    --
    2.16.4
    \
     
     \ /
      Last update: 2018-08-07 00:31    [W:6.605 / U:0.020 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site