lkml.org 
[lkml]   [2018]   [Aug]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/3] sparc32: switch to NO_BOOTMEM
Date
Each populated sparc_phys_bank is added to memblock.memory. The
reserve_bootmem() calls are replaced with memblock_reserve(), and the
bootmem bitmap initialization is droppped.

Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
---
arch/sparc/Kconfig | 4 +--
arch/sparc/mm/init_32.c | 75 +++++++++++++------------------------------------
2 files changed, 21 insertions(+), 58 deletions(-)

diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 0f535de..0a874c8 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -45,6 +45,8 @@ config SPARC
select LOCKDEP_SMALL if LOCKDEP
select NEED_DMA_MAP_STATE
select NEED_SG_DMA_LENGTH
+ select HAVE_MEMBLOCK
+ select NO_BOOTMEM

config SPARC32
def_bool !64BIT
@@ -60,7 +62,6 @@ config SPARC64
select HAVE_KRETPROBES
select HAVE_KPROBES
select HAVE_RCU_TABLE_FREE if SMP
- select HAVE_MEMBLOCK
select HAVE_MEMBLOCK_NODE_MAP
select HAVE_ARCH_TRANSPARENT_HUGEPAGE
select HAVE_DYNAMIC_FTRACE
@@ -79,7 +80,6 @@ config SPARC64
select IRQ_PREFLOW_FASTEOI
select ARCH_HAVE_NMI_SAFE_CMPXCHG
select HAVE_C_RECORDMCOUNT
- select NO_BOOTMEM
select HAVE_ARCH_AUDITSYSCALL
select ARCH_SUPPORTS_ATOMIC_RMW
select HAVE_NMI
diff --git a/arch/sparc/mm/init_32.c b/arch/sparc/mm/init_32.c
index 3ec10b2..e786fe0 100644
--- a/arch/sparc/mm/init_32.c
+++ b/arch/sparc/mm/init_32.c
@@ -23,6 +23,7 @@
#include <linux/init.h>
#include <linux/highmem.h>
#include <linux/bootmem.h>
+#include <linux/memblock.h>
#include <linux/pagemap.h>
#include <linux/poison.h>
#include <linux/gfp.h>
@@ -103,11 +104,14 @@ static unsigned long calc_max_low_pfn(void)

unsigned long __init bootmem_init(unsigned long *pages_avail)
{
- unsigned long bootmap_size, start_pfn;
- unsigned long end_of_phys_memory = 0UL;
- unsigned long bootmap_pfn, bytes_avail, size;
+ unsigned long start_pfn, bytes_avail, size;
+ unsigned long end_of_phys_memory = 0;
+ unsigned long high_pages = 0;
int i;

+ memblock_set_bottom_up(true);
+ memblock_allow_resize();
+
bytes_avail = 0UL;
for (i = 0; sp_banks[i].num_bytes != 0; i++) {
end_of_phys_memory = sp_banks[i].base_addr +
@@ -124,12 +128,15 @@ unsigned long __init bootmem_init(unsigned long *pages_avail)
if (sp_banks[i].num_bytes == 0) {
sp_banks[i].base_addr = 0xdeadbeef;
} else {
+ memblock_add(sp_banks[i].base_addr,
+ sp_banks[i].num_bytes);
sp_banks[i+1].num_bytes = 0;
sp_banks[i+1].base_addr = 0xdeadbeef;
}
break;
}
}
+ memblock_add(sp_banks[i].base_addr, sp_banks[i].num_bytes);
}

/* Start with page aligned address of last symbol in kernel
@@ -140,8 +147,6 @@ unsigned long __init bootmem_init(unsigned long *pages_avail)
/* Now shift down to get the real physical page frame number. */
start_pfn >>= PAGE_SHIFT;

- bootmap_pfn = start_pfn;
-
max_pfn = end_of_phys_memory >> PAGE_SHIFT;

max_low_pfn = max_pfn;
@@ -150,12 +155,15 @@ unsigned long __init bootmem_init(unsigned long *pages_avail)
if (max_low_pfn > pfn_base + (SRMMU_MAXMEM >> PAGE_SHIFT)) {
highstart_pfn = pfn_base + (SRMMU_MAXMEM >> PAGE_SHIFT);
max_low_pfn = calc_max_low_pfn();
+ high_pages = calc_highpages();
printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
- calc_highpages() >> (20 - PAGE_SHIFT));
+ high_pages >> (20 - PAGE_SHIFT));
}

#ifdef CONFIG_BLK_DEV_INITRD
- /* Now have to check initial ramdisk, so that bootmap does not overwrite it */
+ /* Now have to check initial ramdisk, so that it won't pass
+ * the end of memory
+ */
if (sparc_ramdisk_image) {
if (sparc_ramdisk_image >= (unsigned long)&_end - 2 * PAGE_SIZE)
sparc_ramdisk_image -= KERNBASE;
@@ -167,51 +175,12 @@ unsigned long __init bootmem_init(unsigned long *pages_avail)
initrd_end, end_of_phys_memory);
initrd_start = 0;
}
- if (initrd_start) {
- if (initrd_start >= (start_pfn << PAGE_SHIFT) &&
- initrd_start < (start_pfn << PAGE_SHIFT) + 2 * PAGE_SIZE)
- bootmap_pfn = PAGE_ALIGN (initrd_end) >> PAGE_SHIFT;
- }
- }
-#endif
- /* Initialize the boot-time allocator. */
- bootmap_size = init_bootmem_node(NODE_DATA(0), bootmap_pfn, pfn_base,
- max_low_pfn);
-
- /* Now register the available physical memory with the
- * allocator.
- */
- *pages_avail = 0;
- for (i = 0; sp_banks[i].num_bytes != 0; i++) {
- unsigned long curr_pfn, last_pfn;
-
- curr_pfn = sp_banks[i].base_addr >> PAGE_SHIFT;
- if (curr_pfn >= max_low_pfn)
- break;
-
- last_pfn = (sp_banks[i].base_addr + sp_banks[i].num_bytes) >> PAGE_SHIFT;
- if (last_pfn > max_low_pfn)
- last_pfn = max_low_pfn;
-
- /*
- * .. finally, did all the rounding and playing
- * around just make the area go away?
- */
- if (last_pfn <= curr_pfn)
- continue;
-
- size = (last_pfn - curr_pfn) << PAGE_SHIFT;
- *pages_avail += last_pfn - curr_pfn;
-
- free_bootmem(sp_banks[i].base_addr, size);
}

-#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start) {
/* Reserve the initrd image area. */
size = initrd_end - initrd_start;
- reserve_bootmem(initrd_start, size, BOOTMEM_DEFAULT);
- *pages_avail -= PAGE_ALIGN(size) >> PAGE_SHIFT;
+ memblock_reserve(initrd_start, size);

initrd_start = (initrd_start - phys_base) + PAGE_OFFSET;
initrd_end = (initrd_end - phys_base) + PAGE_OFFSET;
@@ -219,16 +188,10 @@ unsigned long __init bootmem_init(unsigned long *pages_avail)
#endif
/* Reserve the kernel text/data/bss. */
size = (start_pfn << PAGE_SHIFT) - phys_base;
- reserve_bootmem(phys_base, size, BOOTMEM_DEFAULT);
- *pages_avail -= PAGE_ALIGN(size) >> PAGE_SHIFT;
+ memblock_reserve(phys_base, size);

- /* Reserve the bootmem map. We do not account for it
- * in pages_avail because we will release that memory
- * in free_all_bootmem.
- */
- size = bootmap_size;
- reserve_bootmem((bootmap_pfn << PAGE_SHIFT), size, BOOTMEM_DEFAULT);
- *pages_avail -= PAGE_ALIGN(size) >> PAGE_SHIFT;
+ size = memblock_phys_mem_size() - memblock_reserved_size();
+ *pages_avail = (size >> PAGE_SHIFT) - high_pages;

return max_pfn;
}
--
2.7.4
\
 
 \ /
  Last update: 2018-08-06 12:53    [W:0.089 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site